|
[Sponsors] |
Recording very high temperatures in my model of micro combustion in porous inert medi |
![]() |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
![]() |
![]() |
#1 |
New Member
Evnie Quay
Join Date: Feb 2019
Posts: 1
Rep Power: 0 ![]() |
Im working on porous media micro combustion in a cylindrical channel. i have been recording very high temperature (2000K-4800K) in the combustor and on the outer wall as well which is made of steel. I used the laminar model set in Ansys fluent. Any suggestion on how to get reasonable temperature range before i experimentally validate it? I set the following
Discretization: second-order upwind Pressure– velocity coupling: COUPLED algorithm Velocity was set to 0.55m/s, heat transfer of 15W, emissivity=0.8 Any ideas please? Thanks |
|
![]() |
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
porous medium model, help please! | cloudnqh | FLUENT | 0 | February 26, 2010 14:27 |
How to model combustion in high speed flows | anandraj | FLUENT | 1 | December 18, 2008 10:10 |
LES and combustion model | Margherita Cadorin | CFX | 0 | October 29, 2008 05:24 |
can alternate combustion model by UDF? | Han Xingsi | FLUENT | 0 | September 1, 2008 02:08 |
How can I model H2-AIR combustion | popi | CFX | 8 | August 16, 2007 05:32 |