Problem in reading journal file

srf020 · January 24, 2019, 02:35

Hello
I am using ANSYS 19.1 workbench.
I have written an script in ansys 19.1 that is related to Fluent. It opens Fluent and reads Fluent Journal file. The problem is during reading mesh file, it does not wait for the mesh file to be fully loaded so it reads the next line that is related to the energy model, so since the mesh is not yet fully loaded, we encounter an error.
anyone can help?

Thanks

script:

system61 = GetSystem(Name="FLU 61")
setupComponent61 = system61.GetComponent(Name="Setup")
setupComponent61.Reset()
setup61 = system61.GetContainer(ComponentName="Setup")
fluentLauncherSettings61 = setup61.GetFluentLauncherSettings()
fluentLauncherSettings61.SetEntityProperties(Prope rties=Set(DisplayText="Fluent Launcher Settings", Dimension="ThreeD", Precision="Double",
EnvPath={}, RunParallel=True, NumberOfProcessors=2))
setup61.Edit()
setup61.SendCommand(Command="(cx-gui-do cx-activate-item "MenuBar*ReadSubMenu*Journal...")(cx-gui-do cx-set-file-dialog-entries
"Select File" '( "FinalJournal")' "All Files (*)")")
setup61.SendCommand(Command='(cx-gui-do cx-activate-item "MenuBar*FileMenu*Close Fluent")')

srf020 · January 24, 2019, 06:24

I found that journal code can not import mesh . when i type:

> (cx-gui-do cx-activate-item "MenuBar*ImportSubMenu*Mesh...")
> (cx-gui-do cx-set-file-dialog-entries "Select File" '( "mesh dir\mesh.msh") "Mesh Files (*.msh* *.MSH* )")

TUI return :
Resetting session...Resetting session...Done

and does no action.

January 24, 2019, 02:35	Problem in reading journal file	#1
srf020 New Member saeed Join Date: Jan 2019 Posts: 2 Rep Power: 0	Hello I am using ANSYS 19.1 workbench. I have written an script in ansys 19.1 that is related to Fluent. It opens Fluent and reads Fluent Journal file. The problem is during reading mesh file, it does not wait for the mesh file to be fully loaded so it reads the next line that is related to the energy model, so since the mesh is not yet fully loaded, we encounter an error. anyone can help? Thanks script: system61 = GetSystem(Name="FLU 61") setupComponent61 = system61.GetComponent(Name="Setup") setupComponent61.Reset() setup61 = system61.GetContainer(ComponentName="Setup") fluentLauncherSettings61 = setup61.GetFluentLauncherSettings() fluentLauncherSettings61.SetEntityProperties(Prope rties=Set(DisplayText="Fluent Launcher Settings", Dimension="ThreeD", Precision="Double", EnvPath={}, RunParallel=True, NumberOfProcessors=2)) setup61.Edit() setup61.SendCommand(Command="(cx-gui-do cx-activate-item "MenuBarReadSubMenuJournal...")(cx-gui-do cx-set-file-dialog-entries "Select File" '( "FinalJournal")' "All Files ()")") setup61.SendCommand(Command='(cx-gui-do cx-activate-item "MenuBarFileMenuClose Fluent")') Last edited by srf020; January 24, 2019 at 06:20.*

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[swak4Foam] swak4foam for OpenFOAM 4.0	mnikku	OpenFOAM Community Contributions	80	May 17, 2022 09:06
[foam-extend.org] Problems installing foam-extend-4.0 on openSUSE 42.2 and Ubuntu 16.04	ordinary	OpenFOAM Installation	19	September 3, 2019 19:13
[OpenFOAM.org] Error creating ParaView-4.1.0 OpenFOAM 2.3.0	tlcoons	OpenFOAM Installation	13	April 20, 2016 18:34
Trouble compiling utilities using source-built OpenFOAM	Artur	OpenFOAM Programming & Development	14	October 29, 2013 11:59
pisoFoam compiling error with OF 1.7.1 on MAC OSX	Greg Givogue	OpenFOAM Programming & Development	3	March 4, 2011 18:18

January 24, 2019, 06:24		#2
srf020 New Member saeed Join Date: Jan 2019 Posts: 2 Rep Power: 0	I found that journal code can not import mesh . when i type: > (cx-gui-do cx-activate-item "MenuBarImportSubMenuMesh...") > (cx-gui-do cx-set-file-dialog-entries "Select File" '( "mesh dir\mesh.msh") "Mesh Files (.msh .MSH )") TUI return : Resetting session...Resetting session...Done and does no action.