Fluent with MHD model

sachin15m707 · February 15, 2018, 03:14

I want to use MHD model in my work but there is some confusion in using it. so, plz anyone tells me the step by step process of using it. I am going to use B=3 Tesla.

I have attached the pics of the model and also some others pics in which conditions are applied.

https://drive.google.com/drive/folde...22?usp=sharing

DzTiger · February 6, 2020, 13:43

Hi sachin, have you finde any solution for the problem ?

vinerm · February 6, 2020, 15:53

The procedure for setting up an MHD model is given in manual. It's pretty straightforward.

https://www.afs.enea.it/project/nept...mhd/node21.htm

The important points are material properties and boundary conditions.

DzTiger · February 12, 2020, 04:45

dear vinerm, thank you for answering my question, but I really need a Tutorial for the MHD model like siñple case of Hartmann flow or something helps.
thank you again.
best regards
Raouf

vinerm · February 12, 2020, 06:33

I do not have any tutorial files but I am sure those are available on Ansys Customer Portal. If you do not have access to that, then you should look at some journal article where Fluent or other tool has been used to do what you wish to do. Look for the article that uses a simpler model, such as a duct for prediction of Hartmann flow. Then the suggestions and the manual would become very handy to setup the case.

DzTiger · February 12, 2020, 10:41

thank you very much for giving me a part of your time dear Vinerm, that is kind of you, I will try to folow your recomendations.

kind regards,
Raouf

vinerm · February 12, 2020, 11:10

This one seems to be a simple one to start with

https://www.ias.ac.in/article/fullte...0/03/0851-0861

DzTiger · February 12, 2020, 13:30

Thank you very much dear Vinerm, I will give it a try!

February 15, 2018, 03:14	Fluent with MHD model	#1
sachin15m707 New Member sachin Join Date: Jun 2017 Posts: 9 Rep Power: 9	I want to use MHD model in my work but there is some confusion in using it. so, plz anyone tells me the step by step process of using it. I am going to use B=3 Tesla. I have attached the pics of the model and also some others pics in which conditions are applied. https://drive.google.com/drive/folde...22?usp=sharing

February 6, 2020, 15:53	Procedure	#3
vinerm Senior Member Vinerm Join Date: Jun 2009 Location: Nederland Posts: 2,946 Blog Entries: 1 Rep Power: 36	The procedure for setting up an MHD model is given in manual. It's pretty straightforward. https://www.afs.enea.it/project/nept...mhd/node21.htm The important points are material properties and boundary conditions. __________________ Regards, Vinerm PM to be used if and only if you do not want something to be shared publicly. PM is considered to be of the least priority.

February 12, 2020, 06:33	MHD Setup	#5
vinerm Senior Member Vinerm Join Date: Jun 2009 Location: Nederland Posts: 2,946 Blog Entries: 1 Rep Power: 36	I do not have any tutorial files but I am sure those are available on Ansys Customer Portal. If you do not have access to that, then you should look at some journal article where Fluent or other tool has been used to do what you wish to do. Look for the article that uses a simpler model, such as a duct for prediction of Hartmann flow. Then the suggestions and the manual would become very handy to setup the case. __________________ Regards, Vinerm PM to be used if and only if you do not want something to be shared publicly. PM is considered to be of the least priority.

February 12, 2020, 11:10	Article	#7
vinerm Senior Member Vinerm Join Date: Jun 2009 Location: Nederland Posts: 2,946 Blog Entries: 1 Rep Power: 36	This one seems to be a simple one to start with https://www.ias.ac.in/article/fullte...0/03/0851-0861 __________________ Regards, Vinerm PM to be used if and only if you do not want something to be shared publicly. PM is considered to be of the least priority.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Seeking Macroscopic Particle Model in Fluent	bzhang7	FLUENT	3	June 25, 2022 18:54
Integration of a Custom C++ Model into FLUENT	Syed Haider	FLUENT	2	March 7, 2018 00:37
Fluent :- turbulence Model	prince_pahariaa	FLUENT	9	May 20, 2016 04:41
turubelnce model in ansys fluent	sa har	FLUENT	3	February 16, 2016 10:19
How to create a 3Ds Car Model importing to FLUENT?	spysunny	Main CFD Forum	1	January 11, 2012 00:40

February 6, 2020, 13:43		#2
DzTiger New Member Abderraouf Join Date: May 2019 Posts: 4 Rep Power: 7	Hi sachin, have you finde any solution for the problem ?

February 12, 2020, 04:45		#4
DzTiger New Member Abderraouf Join Date: May 2019 Posts: 4 Rep Power: 7	dear vinerm, thank you for answering my question, but I really need a Tutorial for the MHD model like siñple case of Hartmann flow or something helps. thank you again. best regards Raouf

February 12, 2020, 10:41		#6
DzTiger New Member Abderraouf Join Date: May 2019 Posts: 4 Rep Power: 7	thank you very much for giving me a part of your time dear Vinerm, that is kind of you, I will try to folow your recomendations. kind regards, Raouf

February 12, 2020, 13:30		#8
DzTiger New Member Abderraouf Join Date: May 2019 Posts: 4 Rep Power: 7	Thank you very much dear Vinerm, I will give it a try!