Flow through pipe - porous media defining

jmex · January 12, 2018, 10:46

Hello everyone,

I want to define porosity, i have pressure drop and flow rate. Can anyone help me how to define porous media in ansys fluent? Or how do i calculate parameters to define porosity?

Thanks in advance.

e_cfd · January 12, 2018, 11:20

Simply, you need to define two zones in design modeler, then in fluent you can active the porous zone from the cell zone menu (which actually adds a sink term to the momentum equation ).
Regards,

jmex · January 12, 2018, 11:40

yes i have done that, but what should be my inputs to porous zone parameter. i mean i have pressure drop and flow data. How do i input that in porous zone?

e_cfd · January 12, 2018, 11:56

Usually you need to know the viscous resistance coefficient (in terms of permeability), inertial resistance coefficents ( just if the velocity is high enough), and porosity. Also you have to enter the direction of each coefficient (if the medium is not isotropic). for more info read the following basic tutorial:
https://www.sharcnet.ca/Software/Flu...ug/node276.htm

If you have pressure drop and velocity you can calculate the permeabilty from darcy or more comprehensive models (depending on your problem)

January 12, 2018, 10:46	Flow through pipe - porous media defining	#1
jmex Member Jigs Join Date: Sep 2017 Location: Pune Posts: 47 Rep Power: 9	Hello everyone, I want to define porosity, i have pressure drop and flow rate. Can anyone help me how to define porous media in ansys fluent? Or how do i calculate parameters to define porosity? Thanks in advance.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Multiphase Porous Media Flow - Convergence Issues	VT_Bromley	FLUENT	8	May 30, 2024 03:59
Flow through two combined porous media with diffrent permeability	Sandee	Main CFD Forum	0	March 28, 2015 11:35
Flow through porous media near well-borne	I_Fedorov	FLUENT	0	October 29, 2014 16:05
How do model two phase granular flow in Porous media?	bahman	FLUENT	1	December 6, 2012 05:39
Can LES be used in porous media flow?	Jin	Main CFD Forum	0	October 19, 2006 09:50

January 12, 2018, 11:20		#2
e_cfd Member ehsan Join Date: Sep 2014 Posts: 38 Rep Power: 12	Simply, you need to define two zones in design modeler, then in fluent you can active the porous zone from the cell zone menu (which actually adds a sink term to the momentum equation ). Regards,

January 12, 2018, 11:40		#3
jmex Member Jigs Join Date: Sep 2017 Location: Pune Posts: 47 Rep Power: 9	yes i have done that, but what should be my inputs to porous zone parameter. i mean i have pressure drop and flow data. How do i input that in porous zone?

January 12, 2018, 11:56		#4
e_cfd Member ehsan Join Date: Sep 2014 Posts: 38 Rep Power: 12	Usually you need to know the viscous resistance coefficient (in terms of permeability), inertial resistance coefficents ( just if the velocity is high enough), and porosity. Also you have to enter the direction of each coefficient (if the medium is not isotropic). for more info read the following basic tutorial: https://www.sharcnet.ca/Software/Flu...ug/node276.htm If you have pressure drop and velocity you can calculate the permeabilty from darcy or more comprehensive models (depending on your problem)