Home > Forums > Software User Forums > ANSYS > FLUENT

Tutorial for running ANSYS/Fluent with continuous input parameters

Updated Threads

Reply

Search this Thread

April 20, 2017, 20:41	Tutorial for running ANSYS/Fluent with continuous input parameters	#1
chaitanya.mokashi New Member Chaitanya Mokashi Join Date: Apr 2017 Posts: 2 Rep Power: 0	Hello! I have a microfluidic mixing system with 3 different inlet pressures as input parameters. I would like to vary the input pressures and see the change in flow rates, mass fractions etc. Currently I am doing this by running simulations by changing the pressure values each time for a simulation. Ideal situation is I specify an equation for change in the input pressures and observe the resulting variation in other quantities. I know this can be done, but I am not sure how... Could anybody please guide me or point towards some tutorials in this regard? Thanks a lot in advance!!

Reply

Tags

fluent, parameter variation

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Tutorial input files	Niru	CFX	19	December 9, 2020 23:11
Pro/E to ANSYS Parameterization Guide	Trues	ANSYS	4	April 18, 2018 06:52
input parameters in cfx-post	mvoss	CFX	5	April 24, 2017 05:34
Real Geometry and input parameters of industrial boiler	Michail	Main CFD Forum	2	March 28, 2013 15:34
ICEM CFD Airfoil Tutorial Input	Tom	ANSYS Meshing & Geometry	1	September 25, 2009 07:50

All times are GMT -4. The time now is 02:02.