|
[Sponsors] |
Interesting new problem/ trying to fix contacts using a porous zone |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
September 24, 2015, 16:40 |
Interesting new problem/ trying to fix contacts using a porous zone
|
#1 |
New Member
Ahmed Jalal
Join Date: Mar 2015
Posts: 22
Rep Power: 11 |
I am modeling a valve, due to the contact between the ball and the valve seat, I get negative volume error.
After many iterations I was thinking maybe if I apply a porous zone at the boundary with very large friction it would allow me to at least get very close to the boundary. The problem I am having is defining the interfaces and boundary conditions. Here is a snippet of what I am talking about. I am also using a 6DOF UDF and Dynamic Mesh. The two rectangles would represent the porous body. Thank You |
|
Tags |
dynamic mesh, negative cell volume, porous body, udf |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Porosity profile, dividing a zone, or getting zone location from zone | khoopes | FLUENT | 0 | June 2, 2012 20:39 |
Polynomial thermophysical properties and laminar porous Zone | vemps | OpenFOAM | 0 | June 30, 2011 11:13 |
Need help!:Particle flow through porous zone | lig | FLUENT | 0 | April 26, 2010 01:47 |
Porous formulation | visuja | FLUENT | 0 | July 7, 2009 22:37 |
Fluent incident radiation problem | Michael Schwarz | Main CFD Forum | 0 | October 21, 1999 06:56 |