Home > Forums > Software User Forums > ANSYS > FLUENT

Modeling steady state in continuous casting mold&SEN

Updated Threads

Reply

Search this Thread

June 12, 2015, 06:51	Modeling steady state in continuous casting mold&SEN	#1
rage New Member abhay Join Date: Aug 2010 Posts: 9 Rep Power: 16	Hi, I am trying to model the turbulent single phase flow in SEN and Mold for continuous casting. Although my results at SEN outlet converge and do not change after the convergence is reached, the case in not same for mold region. The flow is varying although the mass conservation is observed at SEN inlet and mold outlet. Any suggestions are highly appreciated. Thanks !

Reply

Tags

continuous casting, k-epsilon, turbulent flow

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Steady state solution as an initial condition for a transient problem	adnanakhtar	FLUENT	7	November 25, 2016 06:16
Different Pressure in steady state and tranisente simulation	abcdefgh	CFX	4	January 29, 2015 17:47
Constant velocity of the material	Sas	CFX	15	July 13, 2010 09:56
regarding steady state discrete phase calculations	hajszan_gyula	FLUENT	1	February 28, 2006 02:32
About the difference between steady and unsteady problems	Lisa	Main CFD Forum	11	July 5, 2000 15:37

All times are GMT -4. The time now is 09:29.