[mac_09]

Hello all,

Can I access the particles data in the DEFINE_PROPERTY UDF?

Here is my code:
/************************************************** *******************
UDF for specifying a temperature-dependent absorption coefficient property
from particle data - AQIB 2015
************************************************** ********************/
#include "udf.h"
#include "pdf_transport.h"
#include "dpm.h"
DEFINE_PROPERTY(cell_abs_coeff, c, t)
{
Particle *p;
real temp = C_T(c, t);
real alpha_p, qrad=0, alpha;

/*Calculating the qrad from particle data*/
begin_particle_cell_loop(p,c,t)
{
real ys_p = p->scalar[52];
alpha_p = 1.185 * ys_p * P_T(p) * P_RHO(p);
qrad += alpha_p * pow(P_T(p),4.);
}
end_particle_cell_loop(p,c,t)
/* 4*Bolztman constant cancel out*/
alpha = qrad/pow(temp,4.0);
return alpha;
}

This UDF compiled successfully but I got an error when I initialized the solution.

"
Received signal 1 [time 6/8/15 11:49:21]
1000000: /share/apps/opt/ansys/14.5/v145/fluent/fluent14.5.0/lnamd64/2ddp/fluent.14.5.0() [0x1665767]
1000000: /share/apps/opt/ansys/14.5/v145/fluent/fluent14.5.0/lnamd64/2ddp/fluent.14.5.0() [0x1665db3]
1000000: /lib64/libpthread.so.0() [0x3f2740f710]
1000000: libudf_abs/lnamd64/2ddp/libudf.so(cell_abs_coeff+0x49) [0x2ae45ed6d3ad]

Error [client] [time 6/8/15 11:49:21] fluent.14.5.0 received a fatal signal (SEGMENTATION VIOLATION).
999999: /share/apps/opt/ansys/14.5/v145/fluent/fluent14.5.0/lnamd64/2ddp/fluent.14.5.0(CX_Primitive_Error+0x204) [0x1665be4]
999999: /share/apps/opt/ansys/14.5/v145/fluent/fluent14.5.0/lnamd64/2ddp/fluent.14.5.0() [0x1665dff]
999999: /lib64/libpthread.so.0() [0x3f2740f710]
999999: libudf_abs/lnamd64/2ddp/libudf.so(cell_abs_coeff+0x49) [0x2ae45ed6d3ad]
"

Thanks in advanced.

Regards:
MAC