Ship Resistance and wave profile

zinn · February 19, 2015, 16:25

I m doing a project on ship resistance...... It has been weeks and with no result So someone please share ur ship model and ansys file .
Please.
P.S: my research is same as "Numerical simulation for the free surface flow around a complex ship hull form at different Froude numbers" by Y.M Ahmed
mail ID :tenzinsange@gmail.com

CeesH · February 20, 2015, 06:50

Sorry, but weeks without result is not a very weird thing in science. If you can't handle that idea, maybe a scientific career is not the right one for you.

Anyway, what would it help you to just give a ship geometry (aside from the fact that the information you provided here is way too limited to interpret in any way, even if someone would want to give a geometry...)?

I'm guessing that you need to study the resistance of a particular geometry - a particular shape of the ship, maybe vary that, and maybe use different conditions. Based on what you need for the project, you should decide on a geometry, and decide how to model that particular design. Nobody can just give it to you - you will have to research what you want to model and then model it yourself. It might take some time, but that's not a bad thing.

February 19, 2015, 16:25	Ship Resistance and wave profile	#1
zinn New Member West Bengal Join Date: Nov 2014 Posts: 2 Rep Power: 0	I m doing a project on ship resistance...... It has been weeks and with no result So someone please share ur ship model and ansys file . Please. P.S: my research is same as "Numerical simulation for the free surface flow around a complex ship hull form at different Froude numbers" by Y.M Ahmed mail ID :tenzinsange@gmail.com

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Ship Wave Making Resistance	Yasser	CFX	8	May 27, 2017 08:28
Need Help-Wave Profile along a hull and free surface wave contours	Anam	CFX	1	December 22, 2012 07:13
Ship wave making resistance calculation	Tayyaba	STAR-CCM+	2	July 20, 2012 07:06
wave resistance - what software I supposed to use?	leviathan	Main CFD Forum	7	March 27, 2012 11:43
Ship Resistance problems using CCM+	Dan	Siemens	9	April 6, 2011 04:27

February 20, 2015, 06:50		#2
CeesH Senior Member Cees Haringa Join Date: May 2013 Location: Delft Posts: 607 Rep Power: 0	Sorry, but weeks without result is not a very weird thing in science. If you can't handle that idea, maybe a scientific career is not the right one for you. Anyway, what would it help you to just give a ship geometry (aside from the fact that the information you provided here is way too limited to interpret in any way, even if someone would want to give a geometry...)? I'm guessing that you need to study the resistance of a particular geometry - a particular shape of the ship, maybe vary that, and maybe use different conditions. Based on what you need for the project, you should decide on a geometry, and decide how to model that particular design. Nobody can just give it to you - you will have to research what you want to model and then model it yourself. It might take some time, but that's not a bad thing.