3D Cross-flow turbine dynamic mesh error...

SonicGhoul · March 6, 2014, 02:55

Hi, i'm beginner. Thank you for any information. help me.

latest, doing Cross-flow Turbine simulations with fluent..

But dynamic mesh's problem occur..

UDF code is no problem..because using the simple code in tutorial..

I guess.. Remeshing problem at around blades.

I create small Tetra mesh nearby blades for viscous boundary layer..

During simulation, the water came from entrance nozzle..

then water hit the blades, and rotating the rotor.

But rotor is not even half a turn by error.

Some Enginner's talk to me.

He said, " Create more small size meshs nearby blades, Need becoming smooth surface ".

is that solution right??

Thanks all kindly
ghdtmrl@naver.com

CFDturbomachinery · October 16, 2014, 12:36

did you manage to get the solution? or still wating for answers

SonicGhoul · October 16, 2014, 15:20

Still waiting for answers..

After uploaded this question, I had not try solve this problem..

CFDturbomachinery · October 17, 2014, 12:17

Could you post your pictures/setup so that i understand your problem

March 6, 2014, 02:55	3D Cross-flow turbine dynamic mesh error...	#1
SonicGhoul New Member Hongseok Yoo Join Date: Mar 2014 Posts: 3 Rep Power: 12	Hi, i'm beginner. Thank you for any information. help me. latest, doing Cross-flow Turbine simulations with fluent.. But dynamic mesh's problem occur.. UDF code is no problem..because using the simple code in tutorial.. I guess.. Remeshing problem at around blades. I create small Tetra mesh nearby blades for viscous boundary layer.. During simulation, the water came from entrance nozzle.. then water hit the blades, and rotating the rotor. But rotor is not even half a turn by error. Some Enginner's talk to me. He said, " Create more small size meshs nearby blades, Need becoming smooth surface ". is that solution right?? Thanks all kindly ghdtmrl@naver.com Last edited by SonicGhoul; March 6, 2014 at 03:03. Reason: want to write the email address

October 16, 2014, 15:20	Oh, hi	#3
SonicGhoul New Member Hongseok Yoo Join Date: Mar 2014 Posts: 3 Rep Power: 12	Still waiting for answers.. After uploaded this question, I had not try solve this problem..

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[OpenFOAM.org] compile error in dynamicMesh and thermophysicalModels libraries	NickG	OpenFOAM Installation	3	December 30, 2019 01:21
Mesquite - Adaptive mesh refinement / coarsening?	philippose	OpenFOAM Running, Solving & CFD	94	January 27, 2016 10:40
CGNS lib and Fortran compiler	manaliac	Main CFD Forum	2	November 29, 2010 07:25
Version 15 on Mac OS X	gschaider	OpenFOAM Installation	113	December 2, 2009 11:23
fluent add additional zones for the mesh file	SSL	FLUENT	2	January 26, 2008 12:55

October 16, 2014, 12:36	hi	#2
CFDturbomachinery New Member Sharon Wilcox Join Date: Aug 2014 Location: California, USA Posts: 21 Rep Power: 12	did you manage to get the solution? or still wating for answers

October 17, 2014, 12:17		#4
CFDturbomachinery New Member Sharon Wilcox Join Date: Aug 2014 Location: California, USA Posts: 21 Rep Power: 12	Could you post your pictures/setup so that i understand your problem