Re: Simulation of current carrying conductor or a coil in ANSYS fluent

yashganatra · February 5, 2014, 09:42

Hello,
I am working on some problems on MHD. As a starting point, I have been suggested to find magnetic field around a current carrying coil or conductor.
1. I thought of writing UDS for the magnetic field (which is similar to the magnetic induction equation given in MHD manual). Also, since there is no fluid flow, I thought of making the viscosity of the surrounding region high.
2. I am however stuck in the boundary conditions. How can i apply the current (or current density) as inlet?Could someone clarify?
3. Regarding modelling, should i first make the coil and use the enclosure option in design modeller and mesh?

I would be grateful if anyone could suggest some pointers on how I should proceed?
Thank you.

Regards,
Yash Ganatra

yashganatra · February 7, 2014, 02:49

I would be grateful if someone could give their suggestions

Regards,
Yash Ganatra

February 5, 2014, 09:42	Re: Simulation of current carrying conductor or a coil in ANSYS fluent	#1
yashganatra Member Yash Ganatra Join Date: Mar 2013 Posts: 67 Rep Power: 13	Hello, I am working on some problems on MHD. As a starting point, I have been suggested to find magnetic field around a current carrying coil or conductor. 1. I thought of writing UDS for the magnetic field (which is similar to the magnetic induction equation given in MHD manual). Also, since there is no fluid flow, I thought of making the viscosity of the surrounding region high. 2. I am however stuck in the boundary conditions. How can i apply the current (or current density) as inlet?Could someone clarify? 3. Regarding modelling, should i first make the coil and use the enclosure option in design modeller and mesh? I would be grateful if anyone could suggest some pointers on how I should proceed? Thank you. Regards, Yash Ganatra

February 7, 2014, 02:49		#2
yashganatra Member Yash Ganatra Join Date: Mar 2013 Posts: 67 Rep Power: 13	I would be grateful if someone could give their suggestions Regards, Yash Ganatra __________________ My Website: https://sites.google.com/site/yyashganatra/

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Simulation on fluent 14	NAD	FLUENT	0	September 11, 2013 03:05
Comparison between Solidworks Flow Simulation and Ansys Fluent	Bruce828	Main CFD Forum	5	February 23, 2013 11:13
Import Soliworks geometry to Ansys Fluent 12.0	nunolopes	FLUENT	0	October 7, 2010 12:24
few quesions on ANSYS ICEMCFD and FLUENT	Prakash.Paudel	ANSYS	0	August 12, 2010 13:07
Ansys to aquire FLUENT	Michael Bo Hansen	CFX	74	February 24, 2006 21:42