Impinging Air Jet Cooling on Flat Plate(Please Help) :(

Overdosed · March 16, 2013, 18:00

Hi everyone;

I'm doing a project which involved jet impingement on a flat surface for cooling

I'm using Ansys Fluent 13.

My Reynold number is about 46000

(8 mm nozzle diameter and 54 m/s jet velocity)

H/D =4

I'm using K-w SST or K-epsilon turbulance model.

Plate thickness is 4 mm

i used coarse meshing to be sure that im at the right way(after that i'm going to make fine meshing) but i can't see the temperature distrubution right to go on.After 45 seconds with transient process the centre of plate's temperature is high and the corners are lower. But the velocity vectors seem fine.

Please help me . This situation has driven me crazy for about one week.

(i only want to investigate heat transfer from plate. So do i have to model nozzle? is it necessary? )

amr002eg · June 8, 2013, 19:59

firstly,
how did you calculate the Re No.?
can you send me a screen shot for the velocity contours over the plate.

March 16, 2013, 18:00	Impinging Air Jet Cooling on Flat Plate(Please Help) :(	#1
Overdosed New Member Fırat Join Date: Oct 2012 Posts: 2 Rep Power: 0	Hi everyone; I'm doing a project which involved jet impingement on a flat surface for cooling I'm using Ansys Fluent 13. My Reynold number is about 46000 (8 mm nozzle diameter and 54 m/s jet velocity) H/D =4 I'm using K-w SST or K-epsilon turbulance model. Plate thickness is 4 mm i used coarse meshing to be sure that im at the right way(after that i'm going to make fine meshing) but i can't see the temperature distrubution right to go on.After 45 seconds with transient process the centre of plate's temperature is high and the corners are lower. But the velocity vectors seem fine. Please help me . This situation has driven me crazy for about one week. (i only want to investigate heat transfer from plate. So do i have to model nozzle? is it necessary? )

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DNS for Impinging Jet on a Flat Plate	Chandra Shekhar	Main CFD Forum	3	January 18, 2010 06:03
air bubble is disappear increasing time using vof	xujjun	CFX	9	June 9, 2009 08:59
air jet impingment on a moving flat plate	blueman_esf62	FLUENT	0	May 2, 2009 03:40
air jet impingment on a moving flat plate	blueman_esf62	FLUENT	1	April 27, 2009 10:40
IMPINGING JET ........... HELP!!!!!!!!	Amir Omoumi	Main CFD Forum	10	August 30, 1999 23:11

June 8, 2013, 19:59		#2
amr002eg New Member Join Date: Apr 2012 Posts: 4 Rep Power: 14	firstly, how did you calculate the Re No.? can you send me a screen shot for the velocity contours over the plate.