Parallel fluent launch

Eslam · December 14, 2012, 17:01

Hi every body
Fluent gives me this massage during running parallel fluent on my laptop

"Host spawning Node 0 on machine "Eslam_Lap" (ntx86).
You can press CTRL+C to stop the startup process!
Error while connecting to host, No connection could be made because the target machine actively refused it. (10061)
Connect on sock (host=Eslam_Lap, port=8678) failed, exhaused all end points
Unable to connect to 'Eslam_Lap:8678',
sock error: Error = -1"

What do it mean? and how can i solve this problem?

LuckyTran · December 18, 2012, 10:05

Can you run fluent non-parallel (serial) mode without any issues?

The error basically means that the Fluent process cannot start because your machine is not allowing it to. This usually means that some firewall is preventing the fluent start up process.

Eslam · December 18, 2012, 15:33

Yes, FLUENT can run serial on the machine. Sometimes FLUENT runs parallel on my machine and very often refuses.
I'll try to turn off the firewall.
thank you Lucky

LuckyTran · December 18, 2012, 16:23

Another issue with laptops is the presence of both ethernet and wireless internets. Fluent is usually configured to only use one of those. Whenever the wireless is enabled/disabled it can interfere with the fluent start-up process as the default interconnect is no longer available.

December 14, 2012, 17:01	Parallel fluent launch	#1
Eslam New Member Eslam Join Date: Dec 2012 Posts: 4 Rep Power: 13	Hi every body Fluent gives me this massage during running parallel fluent on my laptop "Host spawning Node 0 on machine "Eslam_Lap" (ntx86). You can press CTRL+C to stop the startup process! Error while connecting to host, No connection could be made because the target machine actively refused it. (10061) Connect on sock (host=Eslam_Lap, port=8678) failed, exhaused all end points Unable to connect to 'Eslam_Lap:8678', sock error: Error = -1" What do it mean? and how can i solve this problem?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Parallel fluent not using all processors specified	Paul	FLUENT	18	October 26, 2023 04:54
Parallel running of Fluent	Bhanu Gupta	FLUENT	3	April 7, 2011 10:32
Fluent Parallel SUPPORT	MOHAMMED TOLBA	FLUENT	1	February 20, 2006 02:27
Parallel Fluent with Mandrake	Daniel Dotta	FLUENT	1	May 19, 2005 16:30
error parallel fluent session	Diet	FLUENT	2	January 27, 2005 13:31

December 18, 2012, 10:05		#2
LuckyTran Senior Member Lucky Join Date: Apr 2011 Location: Orlando, FL USA Posts: 5,754 Rep Power: 66	Can you run fluent non-parallel (serial) mode without any issues? The error basically means that the Fluent process cannot start because your machine is not allowing it to. This usually means that some firewall is preventing the fluent start up process.

December 18, 2012, 15:33		#3
Eslam New Member Eslam Join Date: Dec 2012 Posts: 4 Rep Power: 13	Yes, FLUENT can run serial on the machine. Sometimes FLUENT runs parallel on my machine and very often refuses. I'll try to turn off the firewall. thank you Lucky

December 18, 2012, 16:23		#4
LuckyTran Senior Member Lucky Join Date: Apr 2011 Location: Orlando, FL USA Posts: 5,754 Rep Power: 66	Another issue with laptops is the presence of both ethernet and wireless internets. Fluent is usually configured to only use one of those. Whenever the wireless is enabled/disabled it can interfere with the fluent start-up process as the default interconnect is no longer available.