Multiphase simulation in tubular photobioreactor

Theerawat · July 21, 2012, 00:35

Hi everyone, I really need help on my thesis topic. I want to perform the simulation of tubular photobioreactor, the geometry that is shown below. There is 3 phase inside the tube loop: water, air and algae cells. Air must be fed in from a small hole near the elbow in order to circulate water and algae cells. Then, air must get out from the reactor on the top. However, I don't feed any algae cells and water in to the tubular photobioreactor, they must circulate inside. The problem are I don't know how to make Fluent know that there are water and algae cells inside, I don't know how to specify algae concentration of volume fraction. Can you give me some ideas or method to do this.

THANK YOU VERY MUCH your help will make me finish this thesis

utube01.jpg

utube02.jpg

Theerawat · July 22, 2012, 00:17

Oh come on, someone help me please. I really need help

July 21, 2012, 00:35	Multiphase simulation in tubular photobioreactor	#1
Theerawat New Member Theerawat Join Date: Jul 2012 Posts: 22 Rep Power: 14	Hi everyone, I really need help on my thesis topic. I want to perform the simulation of tubular photobioreactor, the geometry that is shown below. There is 3 phase inside the tube loop: water, air and algae cells. Air must be fed in from a small hole near the elbow in order to circulate water and algae cells. Then, air must get out from the reactor on the top. However, I don't feed any algae cells and water in to the tubular photobioreactor, they must circulate inside. The problem are I don't know how to make Fluent know that there are water and algae cells inside, I don't know how to specify algae concentration of volume fraction. Can you give me some ideas or method to do this. THANK YOU VERY MUCH your help will make me finish this thesis utube01.jpg utube02.jpg

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Simulation of Multiphase Heat Exchanger	faisal_ahmed92	CFX	6	June 13, 2012 08:33
Probelem in simulation of multiphase	neetu kumari	Main CFD Forum	0	March 26, 2012 04:24
Volume fraction in multiphase simulation	juliom	CFX	2	July 30, 2011 09:26
Single phase result file for multiphase simulation	Kushagra	CFX	2	July 8, 2008 22:14
multiphase simulation... 2D flow through an elbow	Tim	CFX	10	April 3, 2008 19:13

July 22, 2012, 00:17		#2
Theerawat New Member Theerawat Join Date: Jul 2012 Posts: 22 Rep Power: 14	Oh come on, someone help me please. I really need help