Writing boundary conditions to file

shabbarraza2000 · June 8, 2012, 02:47

Dear,

I want to write the boundary condition defined for mesh in fluent.

The main purpose for doing it is to read the boundary condition to the similar geometry with different grid size.

It will save tons of time for me.

thanks

delaneyluke · June 8, 2012, 07:36

In the Text User Interface,
to write a BC file --> file\write-bc
to read a BC file --> file\read-bc

Regards
Luke

asal · March 28, 2013, 10:23

file/write-bc
file/read-settings

https://www.sharcnet.ca/Software/Flu.../ug/node92.htm

D.W. · May 18, 2022, 17:24

The TUI command
file/write-bc
is now
file/write-settings

see
Fluent - writing settings into file

June 8, 2012, 02:47	Writing boundary conditions to file	#1
shabbarraza2000 New Member rabbahs Join Date: Aug 2010 Posts: 11 Rep Power: 16	Dear, I want to write the boundary condition defined for mesh in fluent. The main purpose for doing it is to read the boundary condition to the similar geometry with different grid size. It will save tons of time for me. thanks

May 18, 2022, 17:24	file/write-settings	#4
D.W. New Member Join Date: Oct 2019 Posts: 8 Rep Power: 7	The TUI command file/write-bc is now file/write-settings see Fluent - writing settings into file

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
wmake compiling new solver	mksca	OpenFOAM Programming & Development	14	June 22, 2018 07:29
Water subcooled boiling	Attesz	CFX	7	January 5, 2013 04:32
Update boundary conditions calculated by an external program	CedricVH	OpenFOAM	2	January 15, 2010 12:55
Version 15 on Mac OS X	gschaider	OpenFOAM Installation	113	December 2, 2009 11:23
RPM in Wind Turbine	Pankaj	CFX	9	November 23, 2009 05:05

June 8, 2012, 07:36		#2
delaneyluke Senior Member Join Date: Mar 2009 Location: Indiana, US Posts: 186 Rep Power: 17	In the Text User Interface, to write a BC file --> file\write-bc to read a BC file --> file\read-bc Regards Luke

March 28, 2013, 10:23		#3
asal Senior Member Astio Lamar Join Date: May 2012 Location: Pipe Posts: 186 Rep Power: 14	file/write-bc file/read-settings https://www.sharcnet.ca/Software/Flu.../ug/node92.htm