Home > Forums > Software User Forums > ANSYS > FLUENT

mesh problem in optimization

Updated Threads

Reply

Search this Thread

May 22, 2012, 16:13	mesh problem in optimization	#1
zikozaki01 New Member ziko zaki Join Date: Feb 2012 Posts: 20 Rep Power: 14	i made a geometry in design explorer using manual point insertion command then line from points then surface from edges i then did the mesh for this surface and named selection but when i go to setup in boundary conditions tab i didn't see my named selection i only saw : interior surface body, wall surface body. PLEASE HELP ME

May 22, 2012, 17:46		#2
zikozaki01 New Member ziko zaki Join Date: Feb 2012 Posts: 20 Rep Power: 14	i found the answer THANKS 2 YOU ALL

Reply

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Dynamic Mesh Problem.	Tom Clark	FLUENT	10	June 21, 2021 05:27
Moving mesh	Niklas Wikstrom (Wikstrom)	OpenFOAM Running, Solving & CFD	122	June 15, 2014 07:20
3D Hybrid Mesh Errors	DarrenC	ANSYS Meshing & Geometry	11	August 5, 2013 07:42
[snappyHexMesh] snappyHexMesh won't work - zeros everywhere!	sc298	OpenFOAM Meshing & Mesh Conversion	2	March 27, 2011 22:11
Convergence problem when ustructured mesh is used.	SangJin Ryu	Siemens	3	October 5, 2000 21:26

All times are GMT -4. The time now is 23:40.