How to create 2 separate Surface Bodies?

Matlab69 · April 20, 2012, 11:37

I would like to know how I could draw up 2 discrete surface bodies without connecting into 1.

I am modelling a gas flow in a tube fitted with a bluff body entering atmosphere.

I have two tube inlets and 2 outlets entering the atmosphere as shown:

Many thanks

dunga82 · April 22, 2012, 02:57

don't choose the connect option when you split the volume in gambit.

LuckyTran · April 22, 2012, 03:45

Quote:

Originally Posted by dunga82

don't choose the connect option when you split the volume in gambit.

How did you know this was made in gambit?

Quote:

Originally Posted by Matlab69

I would like to know how I could draw up 2 discrete surface bodies without connecting into 1.

I am modelling a gas flow in a tube fitted with a bluff body entering atmosphere.

I have two tube inlets and 2 outlets entering the atmosphere as shown:

Many thanks

This is all handled by whatever you used to generate the mesh. So how did you generate the mesh / model?

Matlab69 · April 22, 2012, 15:34

What do you mean?

I have drawn the geometry, and then selected the whole surface body and applied a triangular mesh.

I would like to have the two parts connected but not as one piece...

LuckyTran · April 22, 2012, 15:51

Quote:

Originally Posted by Matlab69

What do you mean?

I have drawn the geometry, and then selected the whole surface body and applied a triangular mesh.

I would like to have the two parts connected but not as one piece...

You cannot build geometry/meshes in Fluent. So my question is, what did you use to make the mesh and build the geometry? In other words, your inquiry is not appropriate for the Fluent section as it does not pertain to Fluent at all.

Matlab69 · April 22, 2012, 15:53

Oh, I have used DesignModeler to draw the geometry. I then used Ansys work bench Meshing to generate the mesh. The problem I have in Fluent that it reads it as one piece...

April 20, 2012, 11:37	How to create 2 separate Surface Bodies?	#1
Matlab69 New Member Andrius Join Date: Mar 2012 Posts: 23 Rep Power: 14	I would like to know how I could draw up 2 discrete surface bodies without connecting into 1. I am modelling a gas flow in a tube fitted with a bluff body entering atmosphere. I have two tube inlets and 2 outlets entering the atmosphere as shown: Many thanks

April 22, 2012, 15:53		#6
Matlab69 New Member Andrius Join Date: Mar 2012 Posts: 23 Rep Power: 14	Oh, I have used DesignModeler to draw the geometry. I then used Ansys work bench Meshing to generate the mesh. The problem I have in Fluent that it reads it as one piece... Last edited by Matlab69; April 22, 2012 at 19:47.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[ICEM] How to generate sunstructured "all-tri patch-dependant" surface mesh in ICEM?	jash	ANSYS Meshing & Geometry	19	July 23, 2013 19:48
[blockMesh] Include list of points	Hikachu	OpenFOAM Meshing & Mesh Conversion	0	June 20, 2011 10:03
[Gmsh] boundaries with gmshToFoam‏	ouafa	OpenFOAM Meshing & Mesh Conversion	7	May 21, 2010 13:43
solid edge problem....can you help?	cindy	Main CFD Forum	3	April 5, 2004 14:43
CFX4.3 -build analysis form	Chie Min	CFX	5	July 13, 2001 00:19

April 22, 2012, 02:57		#2
dunga82 New Member dengjiajia Join Date: Sep 2011 Posts: 14 Rep Power: 15	don't choose the connect option when you split the volume in gambit.

April 22, 2012, 15:34		#4
Matlab69 New Member Andrius Join Date: Mar 2012 Posts: 23 Rep Power: 14	What do you mean? I have drawn the geometry, and then selected the whole surface body and applied a triangular mesh. I would like to have the two parts connected but not as one piece...