udf for scour

ali_13 · November 30, 2017, 16:04

hi everybody
is there anybody to help me to write a udf that cause movement of seabed under the pipes?
thanks

pakk · December 1, 2017, 04:39

Step 1.
Write down what you want the UDF to do. Should the UDF change something? What should it be changed to?
Step 2.
Look in the manual if you can find UDFs that change the same property that you want to change.
Step 3.
Open a text editor, copy the UDF from the manual, and change it into what you want.
Step 4.
Open Fluent, compile the code. If this fails, ask here, but be sure to show the errors that you get after you pressed 'build'.
Step 5.
Attach the UDFs and run the simulation. If this gives an error, ask here, and show the error that you got.
Step 6.
Analyze results. If the results that you got are different than what you expected, ask here. But make clear what you expected, and what you got.

Good luck!

November 30, 2017, 16:04	udf for scour	#1
ali_13 New Member ali Join Date: Jun 2017 Posts: 2 Rep Power: 0	hi everybody is there anybody to help me to write a udf that cause movement of seabed under the pipes? thanks

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
UDF Compilation Error - Loading Library - COMMON Problem! Help!	robtheslob	Fluent UDF and Scheme Programming	8	July 24, 2015 01:53
Parallelize UDF? Which kind of UDF?	Lilly	FLUENT	5	March 25, 2014 03:05
Help! Delete the UDM codes in the UDF	Messi	Fluent UDF and Scheme Programming	2	January 28, 2014 10:01
UDF parallel error: chip-exec: function not found?????	shankara.2	Fluent UDF and Scheme Programming	1	January 16, 2012 23:14
UDF, UDF, UDF, UDF	Luc SEMINEL	Main CFD Forum	0	November 25, 2002 05:01

December 1, 2017, 04:39		#2
pakk Senior Member Join Date: Nov 2013 Posts: 1,965 Rep Power: 27	Step 1. Write down what you want the UDF to do. Should the UDF change something? What should it be changed to? Step 2. Look in the manual if you can find UDFs that change the same property that you want to change. Step 3. Open a text editor, copy the UDF from the manual, and change it into what you want. Step 4. Open Fluent, compile the code. If this fails, ask here, but be sure to show the errors that you get after you pressed 'build'. Step 5. Attach the UDFs and run the simulation. If this gives an error, ask here, and show the error that you got. Step 6. Analyze results. If the results that you got are different than what you expected, ask here. But make clear what you expected, and what you got. Good luck!