Rapid increase in Courant Number -- CFD Online Discussion Forums

March 24, 2024, 10:08	Rapid increase in Courant Number	#1
AerospaceEngineer New Member Ozgur Join Date: Feb 2020 Posts: 7 Rep Power: 6	Hi all, I am doing a jet breakup simulation(primary breakup) on Ansys fluent. My setup includes transient, adaptive mesh refinement, adaptive time step and a very relatively coarse mesh. For almost 200 time steps my calculations goes smoothly but after around this value courant number increases rapidly. And solution fails. Is there any advice on how to have a proper solution. Best regards

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
use the message in macro DEFINE_PROFILE with parallel processor	alireza_T	Fluent UDF and Scheme Programming	3	May 11, 2022 03:08
decomposePar problem: Cell 0contains face labels out of range	vaina74	OpenFOAM Pre-Processing	37	July 20, 2020 06:38
[snappyHexMesh] Error snappyhexmesh - Multiple outside loops	avinashjagdale	OpenFOAM Meshing & Mesh Conversion	53	March 8, 2019 10:42
[OpenFOAM.org] OF2.3.1 + OS13.2 - Trying to use the dummy Pstream library	aylalisa	OpenFOAM Installation	23	June 15, 2015 15:49
[blockMesh] --> foam fatal error:	lillo763	OpenFOAM Meshing & Mesh Conversion	0	March 5, 2014 11:27

All times are GMT -4. The time now is 10:23.