How to assign material to porous region in multiphase problem -- CFD Online Discussion Forums

December 12, 2019, 08:03	How to assign material to porous region in multiphase problem	#1
mataus New Member Mat Join Date: Jan 2017 Posts: 23 Rep Power: 9	Hai I am doing a multiphase simulation. Kindly help me with following issue problem specification water (liquid-vapour) flows through a pipe which is surrounded by a porous region (co2). the problem has two zones. 1. water flow zone 2.porous region when the multiphase model turned on and assign the phases in the water flow region-the same fluid is applied to the porous (co2) region as well. How can I change the cell zone condition in the porous region?

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Multiphase Porous Media Flow - Convergence Issues	VT_Bromley	FLUENT	8	May 30, 2024 03:59
Problem accessing material properties in UDF for Multiphase Multispecies	pmtgt	Fluent Multiphase	3	January 17, 2021 08:11
Problem diverges when exhaust valve opens	swerner0711	AVL FIRE	0	September 21, 2018 08:14
Convergence Problem in Multiphase problem (three phases)	m.uzair	FLUENT	0	August 2, 2018 09:23
mass flow in is not equal to mass flow out	saii	CFX	12	March 19, 2018 06:21

All times are GMT -4. The time now is 17:19.