Home > Forums > Software User Forums > ANSYS > FLUENT > Fluent Multiphase

tunnel spillway fluent simulation

Updated Threads

Reply

Search this Thread

September 19, 2016, 05:05	tunnel spillway fluent simulation	#1
birodhm New Member birodh manandhar Join Date: Sep 2016 Posts: 2 Rep Power: 0	I have been trying to do simulation regarging tunnel spillway. But I have a problem regarding inlet pressure and boundary pressure. The water level is at 1880m and the designed discharge is 3320 m3/s.The inlet gate is at 1815m.The outlet is at 1683m. So, what must be the initial pressure at inlet, operating condition and the outlet pressure?

September 19, 2016, 23:41		#2
birodhm New Member birodh manandhar Join Date: Sep 2016 Posts: 2 Rep Power: 0	the simulation is about the need of aeration in tunnel spillway

Reply

Tags

aeration, spillway, tunnel spillway, tunnels

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Transient simulation in Fluent	khaham	FLUENT	13	March 15, 2016 09:18
Wind tunnel blockage simulation for VAWT	urbanzakapa	FLUENT	0	March 11, 2016 04:39
Acoustic Simulation in Fluent (Pre-defined sound source)	bassam693	FLUENT	1	January 2, 2016 08:06
Problem in Simulation of Gas Explosion in a tunnel	z_mehrdad	FLUENT	1	July 12, 2013 18:31
Chemical Equilibrium Simulation using Fluent	enigma	ANSYS	2	October 27, 2011 09:02

All times are GMT -4. The time now is 23:05.