Two phase flow - velocity problem

andyraq · July 15, 2016, 05:36

Hi.

I'm trying to simulate two phase flow (gas - solids) in unsteady state. After testing many k-e models i'm achieving the same problem - solids have their assumed velocity (12m/s) but after 3,5seconds of real time they pass a distance of 0,5 meters... whereas the first phase (air) with velocity 14m/s need only 0,5 second of real time to pass the whole model. Problem is represented in the picture below. Any ideas what could be the reason of this problem?

http://images.tinypic.pl/i/00803/fkzxkha6fet9.jpg

andyraq · July 17, 2016, 06:01

Guys, any idea will be appreciated

July 15, 2016, 05:36	Two phase flow - velocity problem	#1
andyraq New Member Andrzej Join Date: Jul 2016 Posts: 3 Rep Power: 10	Hi. I'm trying to simulate two phase flow (gas - solids) in unsteady state. After testing many k-e models i'm achieving the same problem - solids have their assumed velocity (12m/s) but after 3,5seconds of real time they pass a distance of 0,5 meters... whereas the first phase (air) with velocity 14m/s need only 0,5 second of real time to pass the whole model. Problem is represented in the picture below. Any ideas what could be the reason of this problem? http://images.tinypic.pl/i/00803/fkzxkha6fet9.jpg

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Discrete Phase Model, outlet mass flow rate does not fit	edu_aero	FLUENT	29	February 3, 2020 09:38
Three Phase flow into a reservoir...	akjha	Main CFD Forum	0	December 15, 2014 08:01
Inlet velocity for particles in eulerian two phase flow	pandaba	FLUENT	0	August 19, 2010 03:17
Problem on boundry of two phase flow	youngan	CFX	0	June 30, 2003 03:32
Terrible Mistake In Fluid Dynamics History	Abhi	Main CFD Forum	12	July 8, 2002 10:11

July 17, 2016, 06:01		#2
andyraq New Member Andrzej Join Date: Jul 2016 Posts: 3 Rep Power: 10	Guys, any idea will be appreciated