confuse on choosing multi phase solver

AHF · June 2, 2016, 15:49

Hi
i want to simulate enclosure with 2 inlet and 1 outlet that oil and air are my inlets . i confused to choosing solver like VOF , DPM ... etc
any idea that which solver should i use ?

PAULDWARRIOR · June 3, 2016, 03:32

If there is no splashing and droplet trapping, you can go for VOF solver because the interface length between the phases is large.

AHF · June 3, 2016, 07:21

Quote:

Originally Posted by PAULDWARRIOR

If there is no splashing and droplet trapping, you can go for VOF solver because the interface length between the phases is large.

thanks for reply

splashing and droplet trapping are exactly the parameter that i want to study in this simulation
they mixed in high velocity

June 2, 2016, 15:49	confuse on choosing multi phase solver	#1
AHF Member amirhossein Join Date: Jul 2014 Location: Canada Posts: 81 Rep Power: 12	Hi i want to simulate enclosure with 2 inlet and 1 outlet that oil and air are my inlets . i confused to choosing solver like VOF , DPM ... etc any idea that which solver should i use ?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[ANSYS Meshing] Help with element size	sandri_92	ANSYS Meshing & Geometry	14	November 14, 2018 08:54
choose the best solver for two phase flow(bubble plume and water)	farzadpolytechnic	OpenFOAM Running, Solving & CFD	0	May 30, 2016 08:07
thobois class engineTopoChangerMesh error	Peter_600	OpenFOAM	4	August 2, 2014 10:52
using interface with Euler multi phase model	karimi	FLUENT	0	May 22, 2011 03:46
multi phase modelling in fluent	naren	FLUENT	1	January 25, 2005 13:31

June 3, 2016, 03:32		#2
PAULDWARRIOR New Member Manoj Join Date: Jun 2016 Posts: 1 Rep Power: 0	If there is no splashing and droplet trapping, you can go for VOF solver because the interface length between the phases is large.