Multiphase Eluerian + Boiling model

V_J123 · May 23, 2016, 04:02

I have constant heat flux on a boundary where liquid water is impinging. Because of heat, water is vaporizing. The temperature change at the heat flux wall should be low because of the heat carried by the liquid (vaporization). But, i am getting large change in temperature (around 30 kelvin instead of 2 kelvin). What might be the probable cause?

umararshad91 · June 10, 2016, 02:34

I'm stuck too in this boiling in a pipe flow problem, does anybody have any tutorial of this case?

hossein-mech · June 12, 2016, 01:51

Dear Friends,
I have been working experimentally on boiling heat transfer so far. I have to work more specifically on the microscopic aspect of that. So, I was wondering if you could guide me how I can investigate the effect of nano particles on bubble creation and departure?

May 23, 2016, 04:02	Multiphase Eluerian + Boiling model	#1
V_J123 New Member Vijay Jangid Join Date: May 2016 Posts: 2 Rep Power: 0	I have constant heat flux on a boundary where liquid water is impinging. Because of heat, water is vaporizing. The temperature change at the heat flux wall should be low because of the heat carried by the liquid (vaporization). But, i am getting large change in temperature (around 30 kelvin instead of 2 kelvin). What might be the probable cause?

June 12, 2016, 01:51	Nano Particles Brownian motion in Flow Boiling	#3
hossein-mech New Member hossein Join Date: Jun 2016 Posts: 1 Rep Power: 0	Dear Friends, I have been working experimentally on boiling heat transfer so far. I have to work more specifically on the microscopic aspect of that. So, I was wondering if you could guide me how I can investigate the effect of nano particles on bubble creation and departure?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Two-phase Eulerian model for nucleate subcooled boiling	Edy	OpenFOAM	5	February 11, 2017 17:21
The problem of Stiff Chemistry Solver in Multiphase model	shenzhou1987	FLUENT	1	January 11, 2016 03:52
A question about a turbulent model in multiphase flows	amin.z	FLUENT	0	March 22, 2015 15:32
Selecting the appropriate multiphase model and radiation model	panos_metal	FLUENT	0	June 18, 2010 08:58
Multiphase flow. Dispersed and free surface model	Luis	CFX	8	May 29, 2007 19:13

June 10, 2016, 02:34		#2
umararshad91 New Member Umar Join Date: May 2016 Posts: 14 Rep Power: 10	I'm stuck too in this boiling in a pipe flow problem, does anybody have any tutorial of this case?