geometry

ajaya · March 19, 2012, 00:41

in concentric tube heat exchanger solid wire is wound on the inner tube .in which software we have to do that that's why it will generate 3 bodies outer , inner, and helix. where helix solid wire is used to create swirl in the flow.

MuxaB · April 17, 2012, 23:26

Quote:

Originally Posted by ajaya

in concentric tube heat exchanger solid wire is wound on the inner tube .in which software we have to do that that's why it will generate 3 bodies outer , inner, and helix. where helix solid wire is used to create swirl in the flow.

i'd think any CAD package cam do it, as long as you can convert the result to STL format before importing into FLOW-3D

March 19, 2012, 00:41	geometry	#1
ajaya New Member Join Date: Feb 2012 Posts: 4 Rep Power: 14	in concentric tube heat exchanger solid wire is wound on the inner tube .in which software we have to do that that's why it will generate 3 bodies outer , inner, and helix. where helix solid wire is used to create swirl in the flow.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Problem Importing Geometry ProE to CFX	fatb0y	CFX	3	January 14, 2012 20:42
[DesignModeler] Error while Loading a Geometry	JD944	ANSYS Meshing & Geometry	0	October 25, 2011 15:51
[Gmsh] Problem meshing an imported geometry	Alicia	OpenFOAM Meshing & Mesh Conversion	0	March 30, 2010 05:53
Simulation of Flow through Complex 3D Geometry	EmersonKB	CFX	5	July 2, 2009 09:17
vitual _ real	deneb	FLUENT	3	January 22, 2007 05:31