flow3d processes ?

degr · June 20, 2009, 07:04

Who can provide flow3d processes? I'm going to study this;

thank !!

degr · June 21, 2009, 05:26

hple me....AV8D

H.C · June 22, 2009, 12:23

Quote:

Originally Posted by degr

Who can provide flow3d processes? I'm going to study this;

thank !!

not sure what you meant by flow3d processes?

degr · June 23, 2009, 02:19

Quote:

Originally Posted by H.C

not sure what you meant by flow3d processes?

H.C ....

I am starting to learn Flow3d, do not know how to operate his ;

Willing to help me?

I need you to lead into the flow of the world

stefmascio · June 23, 2009, 03:54

you can start from the user manual (you have it online in the software), or with the examples included in the release.

degr · June 23, 2009, 07:11

Quote:

Originally Posted by stefmascio

you can start from the user manual (you have it online in the software), or with the examples included in the release.

Can someone teach me step by step, learning flow; I need a teacher, I hope is enthusiastic

degr · June 23, 2009, 07:14

I have a basis to help in the examples, try to mere; mesh block such as the problem?

stefmascio · July 27, 2009, 05:14

hello,
you are a bit general in what you need. FLOW-3D is a very wide and big software, and needs a bit of initial knowledge on CFD modeling. you should ask something more specific or to start from the manual...

degr · July 27, 2009, 09:39

Quote:

Originally Posted by stefmascio

hello,
you are a bit general in what you need. FLOW-3D is a very wide and big software, and needs a bit of initial knowledge on CFD modeling. you should ask something more specific or to start from the manual...

thank you, i know

June 20, 2009, 07:04	flow3d processes ?	#1
degr New Member degr Join Date: Jun 2009 Posts: 11 Rep Power: 17	Who can provide flow3d processes? I'm going to study this; thank !!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Anyone is using FLOW3D?	Lee	Main CFD Forum	12	December 23, 2010 06:41
question about flow3d	MM	Main CFD Forum	3	July 11, 2007 08:20
[General] Flow3d post processing with ParaView	Rajiv Kothari	ParaView	0	May 24, 2007 10:00
Ocean Wave Model with FLOW3D	Haryo Armono	Main CFD Forum	0	January 28, 1999 14:11
Body fitted grid generation in FLOW3D	Nur Ikhwan	Main CFD Forum	1	January 25, 1999 06:40

June 21, 2009, 05:26		#2
degr New Member degr Join Date: Jun 2009 Posts: 11 Rep Power: 17	hple me....AV8D

June 23, 2009, 03:54		#5
stefmascio Member Stefano Join Date: Mar 2009 Posts: 59 Rep Power: 17	you can start from the user manual (you have it online in the software), or with the examples included in the release.

June 23, 2009, 07:14		#7
degr New Member degr Join Date: Jun 2009 Posts: 11 Rep Power: 17	I have a basis to help in the examples, try to mere; mesh block such as the problem?

July 27, 2009, 05:14		#8
stefmascio Member Stefano Join Date: Mar 2009 Posts: 59 Rep Power: 17	hello, you are a bit general in what you need. FLOW-3D is a very wide and big software, and needs a bit of initial knowledge on CFD modeling. you should ask something more specific or to start from the manual...