 |
 |
 |
|
|
|
[Sponsors] | ||||
replicating a benchmark on Solidworks Flow Simulation |
 |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
December 5, 2024, 16:16
|
replicating a benchmark on Solidworks Flow Simulation
|
#1 |
|
New Member
Bruno B W
Join Date: Aug 2023
Posts: 9
Rep Power: 3  |
Dear CFDers,
i'm trying to replicate the folowing paper, case 2D unsteady, on SW FlowSimulation 2023. https://link.springer.com/chapter/10...322-89849-4_39 Configurated a "new material" as rho=1kg/m3, and mi=0.001Pa*s (nu=0.001m2/s). And set the sim as 2-D. inlet as 1.5m/s fully developed, walls as real, and outlet as total pressure as 101325Pa 273.2K. Set Drag force as Force in Z axis and Lift as Force in Y axis. Made a grid as 351,834 Fluid cells and 26,868 Fluid cells contacting solids. Got some vonKarman vortex and street but the drag force is almost zero  Please, any sugestions or tips would be very welcome. Thanks in advance. |
|
|
|
|
|
| Tags |
| dassault systemes, flow around a cylinder, flow simulation, von karman street |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Unsteady Subsonic Nozzle Flow Simulation Issue with SU2 | Madsskjaerbaek | SU2 | 3 | April 17, 2024 10:41 |
| Solidworks Flow Simulation underpredicting blower performance | 310toumad | FloEFD, FloWorks & FloTHERM | 0 | January 17, 2024 12:19 |
| Ncrit for a glider Xfoil. How to use it. GPT4 answer | AlanMattanó | Main CFD Forum | 0 | April 10, 2023 13:16 |
| Periodic Boundary for turbomachinery by Solidworks Flow Simulation | newbie384 | Main CFD Forum | 0 | January 28, 2014 20:23 |
| Query regarding temperature distribution in Solidworks flow simulation | syarif | FloEFD, FloWorks & FloTHERM | 3 | February 27, 2013 06:22 |
Linear Mode
