Import CFXTurbogrid(*.gtm) file to NUMECA

csmistry · February 8, 2011, 12:46

Can CFX turbogrid mesh (*.gtm) be import to numeca file for solver ?

In what format *.gtm needs to be saved for the same?

Hamidzoka · February 17, 2011, 04:46

Dear csmistry;
Numeca can not import *.gtm meshes directly.
Numeca unstructured grid generator can recieve Ansys hexaderal mesh. and its strctured multi block mesh generator package can accepts *.CGNS mesh files.

regards

csmistry · March 4, 2011, 11:54

Sir,
If i want to do comparison of their performance and result then what to do?
Can you suggest any other way to import .gtm file to numeca?
I heard that if i input .gtm to ICEMCFD and from there if i save.igg file then will it work?

Please reply me

Hamidzoka · March 5, 2011, 04:10

Dear csmistry;As far as i know, ICEMCFD does not export meshes to .igg format.you may build a new mesh in numeca for validation.regards

csmistry · March 9, 2011, 10:09

Sir, can we insert *.cgns to Numeca?
i made it from ICEM CFD but what to do next is not known to me for solving a problem in numeca...
please do guide me

Hamidzoka · March 12, 2011, 02:57

I think you had better to import your blade geometry in ".geomturbo" format. Numeca autogrid module can easily generate a multi-block structured mesh around your model.
according to its unique style of meshing, it wont accept other mesh files formats such as CGNS.

regards

February 8, 2011, 12:46	*Import CFXTurbogrid(.gtm) file to NUMECA**	#1
csmistry Member mistry Join Date: Apr 2009 Location: India Posts: 69 Rep Power: 17	Can CFX turbogrid mesh (.gtm) be import to numeca file for solver ? In what format .gtm needs to be saved for the same?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[swak4Foam] GroovyBC the dynamic cousin of funkySetFields that lives on the suburb of the mesh	gschaider	OpenFOAM Community Contributions	300	October 29, 2014 19:00
channelFoam for a 3D pipe	AlmostSurelyRob	OpenFOAM	3	June 24, 2011 14:06
1.7.x Environment Variables on Linux 10.04	rasma	OpenFOAM Installation	9	July 30, 2010 05:43
[blockMesh] BlockMesh FOAM warning	gaottino	OpenFOAM Meshing & Mesh Conversion	7	July 19, 2010 15:11
ParaView Compilation	jakaranda	OpenFOAM Installation	3	October 27, 2008 12:46

February 17, 2011, 04:46		#2
Hamidzoka Senior Member Hamid Zoka Join Date: Nov 2009 Posts: 293 Rep Power: 19	Dear csmistry; Numeca can not import .gtm meshes directly. Numeca unstructured grid generator can recieve Ansys hexaderal mesh. and its strctured multi block mesh generator package can accepts .CGNS mesh files. regards

March 4, 2011, 11:54		#3
csmistry Member mistry Join Date: Apr 2009 Location: India Posts: 69 Rep Power: 17	Sir, If i want to do comparison of their performance and result then what to do? Can you suggest any other way to import .gtm file to numeca? I heard that if i input .gtm to ICEMCFD and from there if i save.igg file then will it work? Please reply me

March 5, 2011, 04:10		#4
Hamidzoka Senior Member Hamid Zoka Join Date: Nov 2009 Posts: 293 Rep Power: 19	Dear csmistry;As far as i know, ICEMCFD does not export meshes to .igg format.you may build a new mesh in numeca for validation.regards

March 9, 2011, 10:09		#5
csmistry Member mistry Join Date: Apr 2009 Location: India Posts: 69 Rep Power: 17	Sir, can we insert *.cgns to Numeca? i made it from ICEM CFD but what to do next is not known to me for solving a problem in numeca... please do guide me

March 12, 2011, 02:57		#6
Hamidzoka Senior Member Hamid Zoka Join Date: Nov 2009 Posts: 293 Rep Power: 19	I think you had better to import your blade geometry in ".geomturbo" format. Numeca autogrid module can easily generate a multi-block structured mesh around your model. according to its unique style of meshing, it wont accept other mesh files formats such as CGNS. regards