 |
 |
 |
|
|
|
[Sponsors] | ||||
Numeca Fine/turbo compatibility wit IGES and Comet |
 |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
May 22, 2006, 12:13
|
Numeca Fine/turbo compatibility wit IGES and Comet
|
#1 |
|
Guest
Posts: n/a
|
Hi, can anyone says me if Fine/turbo can read IGES cad files? Is the mesh readable from Comet solver?
|
|
|
||
|
August 18, 2006, 03:38
|
Re: Numeca Fine/turbo compatibility wit IGES and C
|
#2 |
|
Guest
Posts: n/a
|
Yes, the mesh generators of FINE/Turbo, IGG and AutoGrid, can read IGES format and save the mesh (excluding the boundary conditions) in CGNS or Plot3D format. The boundary conditions are stored in a text file .bcs that is specific to FINE/Turbo.
|
|
|
|
||
|
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Importing iges from Fine/Turbo | Chris | Siemens | 6 | March 29, 2005 20:26 |
| FINE/Turbo won't load | shireece | Fidelity CFD | 0 | May 24, 2004 08:10 |
| NUMECA Fine/Turbo Opinions? | Possible_change | Main CFD Forum | 13 | December 30, 2002 10:38 |
| Numeca Fine | dimitris | Main CFD Forum | 5 | June 17, 2001 12:43 |
| NUMECA Fine / Baldwin-Lomax Turbulence model | A. Beretta | Main CFD Forum | 12 | November 29, 2000 13:52 |
Linear Mode
