Export geomTurbo file in Autogrid

ulugbey · December 4, 2021, 13:38

Hello,

I am using Fine Turbo 14.2. I imported CAD file in Autogrid 5. I heard that there is a possibility to write out geomTurbofile from the imported CAD File. How can export geomTurbo file from the imported CAD File?

Thanks in advance!

Best regards

colinda1 · December 6, 2021, 04:25

Hi,
It is indeed possible to export to a geomTurbo file as described in detail in the user guide in the dedicated section of the Geometry definition chapter.

Btw, you may want to update your installation to 16.1 as the version 14.2 is quite outdated.

Best regards,
Colinda

Hamidzoka · December 20, 2021, 00:47

hi;
Simply right click on the imported blade on the Autogrid screen and select export option. a window will appear which allows you modify settings of the exported geometry such as number of sections, number of points on each side, etc..
Before exporting the geometry, make sure that your imported blade has intersections with hub and shroud curves and inlet and outlet boundaries are generated at its upstream and downstream.

Best

December 4, 2021, 13:38	Export geomTurbo file in Autogrid	#1
ulugbey Member Join Date: Dec 2020 Posts: 38 Rep Power: 5	Hello, I am using Fine Turbo 14.2. I imported CAD file in Autogrid 5. I heard that there is a possibility to write out geomTurbofile from the imported CAD File. How can export geomTurbo file from the imported CAD File? Thanks in advance! Best regards Last edited by ulugbey; December 4, 2021 at 18:54.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[swak4Foam] Installation Problem with OF 6 version	Aurel	OpenFOAM Community Contributions	14	November 18, 2020 17:18
[Other] Adding solvers from DensityBasedTurbo to foam-extend 3.0	Seroga	OpenFOAM Community Contributions	9	June 12, 2015 18:18
[swak4Foam] swak4foam building problem	GGerber	OpenFOAM Community Contributions	54	April 24, 2015 17:02
[OpenFOAM] Annoying issue of automatic "Rescale to Data Range " with paraFoam/paraview 3.12	keepfit	ParaView	60	September 18, 2013 04:23
DxFoam reader update	hjasak	OpenFOAM Post-Processing	69	April 24, 2008 02:24

December 6, 2021, 04:25		#2
colinda1 Senior Member Colinda Join Date: May 2012 Location: Brussels Posts: 153 Rep Power: 14	Hi, It is indeed possible to export to a geomTurbo file as described in detail in the user guide in the dedicated section of the Geometry definition chapter. Btw, you may want to update your installation to 16.1 as the version 14.2 is quite outdated. Best regards, Colinda

December 20, 2021, 00:47		#3
Hamidzoka Senior Member Hamid Zoka Join Date: Nov 2009 Posts: 293 Rep Power: 19	hi; Simply right click on the imported blade on the Autogrid screen and select export option. a window will appear which allows you modify settings of the exported geometry such as number of sections, number of points on each side, etc.. Before exporting the geometry, make sure that your imported blade has intersections with hub and shroud curves and inlet and outlet boundaries are generated at its upstream and downstream. Best