2d quad meshing

praveen · October 26, 2017, 07:07

Can engrid be used to generate 2d mesh of quadrilaterals ?

TubaHeni · March 27, 2018, 04:34

That would be interesting for me too.
Do you have already any idea ??

Bests
Christian

praveen · March 27, 2018, 04:49

I could not find any info on this.

NablaDyn · March 30, 2018, 04:53

AFAIK EnGrid can only handle triangulated surfaces and generate tetrahedral volume meshes. IMHO it's also a bit unstable and not so easy to learn. For quad meshes (to use with OpenFOAM) I would strongly recommend either MegaCads or Salome Platform. I always use MegaCads for structured meshes as it creates beautyfully smooth multiblock grids. Also in 3D...

October 26, 2017, 07:07	2d quad meshing	#1
praveen Super Moderator Praveen. C Join Date: Mar 2009 Location: Bangalore Posts: 343 Blog Entries: 6 Rep Power: 18	Can engrid be used to generate 2d mesh of quadrilaterals ? __________________ http://cpraveen.github.io http://twitter.com/cfdlab http://github.com/cpraveen

March 27, 2018, 04:34		#2
TubaHeni New Member Christian Tomsu Join Date: Feb 2018 Posts: 1 Rep Power: 0	That would be interesting for me too. Do you have already any idea ?? Bests Christian __________________ Christian Tomsu Projectmanagement / Advisor Modeling www.spekter.de

March 27, 2018, 04:49		#3
praveen Super Moderator Praveen. C Join Date: Mar 2009 Location: Bangalore Posts: 343 Blog Entries: 6 Rep Power: 18	I could not find any info on this. __________________ http://cpraveen.github.io http://twitter.com/cfdlab http://github.com/cpraveen

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[ANSYS Meshing] Icem meshing queries	Mfaizan	ANSYS Meshing & Geometry	21	July 31, 2015 00:10
[ANSYS Meshing] Cooper Method Meshing	RTN3000	ANSYS Meshing & Geometry	1	March 2, 2015 00:59
Meshing software comparison	Wikie	Mesh Generation & Pre-Processing	5	September 29, 2014 07:09
[ANSYS Meshing] Meshing strategy for External Flows	Hybrid	ANSYS Meshing & Geometry	0	January 24, 2012 15:27
Best Meshing scheme for Cylinder	Nutrex	Main CFD Forum	4	July 29, 2008 12:03

March 30, 2018, 04:53		#4
NablaDyn Senior Member Join Date: Oct 2015 Location: Germany Posts: 100 Rep Power: 11	AFAIK EnGrid can only handle triangulated surfaces and generate tetrahedral volume meshes. IMHO it's also a bit unstable and not so easy to learn. For quad meshes (to use with OpenFOAM) I would strongly recommend either MegaCads or Salome Platform. I always use MegaCads for structured meshes as it creates beautyfully smooth multiblock grids. Also in 3D...