 |
 |
 |
|
|
|
[Sponsors] | ||||
Creating volume mesh in anti-symmetric curve domain - not possible? |
 |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
August 18, 2014, 11:47
|
Creating volume mesh in anti-symmetric curve domain - not possible?
|
#1 |
|
Member
Gowain
Join Date: May 2014
Location: Ireland
Posts: 86
Rep Power: 12  |
Hi
I am able to create volume mesh in cube domains and other regular shapes but am unable to do so in domains such as the one attached - i believe this is due to the irregular shape of the domain. - is there a way around this? rgds g |
|
|
|
|
|
August 18, 2014, 13:43
|
Geomsearch error>?
|
#2 |
|
Member
Gowain
Join Date: May 2014
Location: Ireland
Posts: 86
Rep Power: 12 |
I have simplified the domain - see attached, yet receive the following error once attempting to create volume and/or pris layer:
Netgen stopped with the following error: illegal position in Geomsearch can someone please explain this for me? regards g |
|
|
|
|
|
|
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| [snappyHexMesh] Add Mesh Layers doesnt work on the whole surface | Kryo | OpenFOAM Meshing & Mesh Conversion | 13 | February 17, 2022 08:34 |
| snappyhexmesh remove blockmesh geometry | philipp1 | OpenFOAM Running, Solving & CFD | 2 | December 12, 2014 11:58 |
| Problem of simulating of small droplet with radius of 2mm | liguifan | OpenFOAM Running, Solving & CFD | 5 | June 3, 2014 03:53 |
| [blockMesh] error message with modeling a cube with a hold at the center | hsingtzu | OpenFOAM Meshing & Mesh Conversion | 2 | March 14, 2012 10:56 |
| [Gmsh] 2D Mesh Generation Tutorial for GMSH | aeroslacker | OpenFOAM Meshing & Mesh Conversion | 12 | January 19, 2012 04:52 |
Linear Mode
