Input mesh formats

alexandresapet · June 26, 2014, 08:46

Hi all,

I am considering using enGrid to generate a volume mesh from a surface mesh (like TetGen does). Then, I would like to know what kind of formats enGrid can open (I am thinking about the .poly and .msh formats).

Thank you in advance,
Alexandre

wyldckat · July 1, 2014, 16:09

Greetings Alexandre and welcome to the forum!

If you install enGrid, you'll be able to see what formats it's able to import!

Quoting from the wiki, at least the following are supported:

Quote:

Currently enGrid has interfaces to Blender, Gmsh, and STL files. Gmsh can be used to import STEP and IGES ﬁles and it can also be used for simple geometry modelling.

Best regards,
Bruno

elvis · August 7, 2014, 03:51

Hi Alexandre,

you can PAY Oliver to add new formats if that is really nescessary.
But with some python scripting you can convert many formats with paraview or VTK yourself. http://www.paraview.org/Wiki/images/...Tutorial41.pdf
http://www.paraview.org/Wiki/Convert...rom_PLY_to_VTP

see those readers vtk supports http://www.vtk.org/doc/release/6.0/html/classes.html

June 26, 2014, 08:46	Input mesh formats	#1
alexandresapet New Member Alexandre Sapet Join Date: Jun 2014 Posts: 3 Rep Power: 12	Hi all, I am considering using enGrid to generate a volume mesh from a surface mesh (like TetGen does). Then, I would like to know what kind of formats enGrid can open (I am thinking about the .poly and .msh formats). Thank you in advance, Alexandre

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Star CCM Overset Mesh Error (Rotating Turbine)	thezack	Siemens	7	October 12, 2016 12:14
3D Hybrid Mesh Errors	DarrenC	ANSYS Meshing & Geometry	11	August 5, 2013 07:42
[snappyHexMesh] Layers:problem with curvature	giulio.topazio	OpenFOAM Meshing & Mesh Conversion	10	August 22, 2012 10:03
engrid -> save as .stl with boundarie codes	Zymon	enGrid	31	August 29, 2011 14:40
Icemcfd 11: Loss of mesh from surface mesh option?	Joe	CFX	2	March 26, 2007 19:10

August 7, 2014, 03:51		#3
elvis Senior Member Elvis Join Date: Mar 2009 Location: Sindelfingen, Germany Posts: 620 Blog Entries: 6 Rep Power: 24	Hi Alexandre, you can PAY Oliver to add new formats if that is really nescessary. But with some python scripting you can convert many formats with paraview or VTK yourself. http://www.paraview.org/Wiki/images/...Tutorial41.pdf http://www.paraview.org/Wiki/Convert...rom_PLY_to_VTP see those readers vtk supports http://www.vtk.org/doc/release/6.0/html/classes.html