Mesh generation for Edge

jantheron · November 25, 2011, 15:09

Does anyone have access to a mesh generator for Edge? Is there perhaps a utility to convert gmsh meshes for use in Edge?

Thanks!

Jan Theron
www.kanoefabrik.com

jka · February 24, 2012, 15:13

Do you have any option to export the mesh to CGNS format?
I'm not familiar with gmsh

jantheron · March 4, 2012, 09:55

Gmsh is an open-source grid generator. Its compiled version does not have cgns export capability. For that to work, one first has to compile hdf5, then cgns, then recompile gmsh. I have tried doing that on my Mac but have given up after many failed attempts at compiling hdf5.

What I need is the native grid generator that ships with the full version of Edge. It seems the developers of Edge are in submarine mode and do not respond to queries at all.

Jan Theron

jka · March 5, 2012, 03:17

Just checked what gmsh uses as a format for exporting meshes, there is something called p3d, isn't t the plot3d format?
If it is, check this web page for converter from plot3d to cgns and then
you can use cgns to Edge format.
http://cgns.sourceforge.net/Utilities.html

November 25, 2011, 15:09	Mesh generation for Edge	#1
jantheron New Member Johannes N Theron Join Date: Feb 2010 Location: Hamburg Posts: 25 Rep Power: 16	Does anyone have access to a mesh generator for Edge? Is there perhaps a utility to convert gmsh meshes for use in Edge? Thanks! Jan Theron www.kanoefabrik.com

March 4, 2012, 09:55	gmsh-Edge	#3
jantheron New Member Johannes N Theron Join Date: Feb 2010 Location: Hamburg Posts: 25 Rep Power: 16	Gmsh is an open-source grid generator. Its compiled version does not have cgns export capability. For that to work, one first has to compile hdf5, then cgns, then recompile gmsh. I have tried doing that on my Mac but have given up after many failed attempts at compiling hdf5. What I need is the native grid generator that ships with the full version of Edge. It seems the developers of Edge are in submarine mode and do not respond to queries at all. Jan Theron

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[ICEM] Generating Mesh for STL Car in Windtunnel Simulation	tommymoose	ANSYS Meshing & Geometry	48	April 15, 2013 05:24
[Gmsh] 2D Mesh Generation Tutorial for GMSH	aeroslacker	OpenFOAM Meshing & Mesh Conversion	12	January 19, 2012 04:52
[ICEM] Unstructure Meshing Around Imported Plot3D Structured Mesh ICEM	kawamatt2	ANSYS Meshing & Geometry	17	December 20, 2011 12:45
mesh generation for in-cylinder fluent simulation	hennas	ANSYS Meshing & Geometry	2	May 31, 2011 16:08
General questions on grid-based computing	Adrin Gharakhani	Main CFD Forum	21	June 5, 2000 14:47

February 24, 2012, 15:13		#2
jka New Member Adam Jirasek Join Date: Mar 2011 Posts: 18 Rep Power: 15	Do you have any option to export the mesh to CGNS format? I'm not familiar with gmsh

March 5, 2012, 03:17		#4
jka New Member Adam Jirasek Join Date: Mar 2011 Posts: 18 Rep Power: 15	Just checked what gmsh uses as a format for exporting meshes, there is something called p3d, isn't t the plot3d format? If it is, check this web page for converter from plot3d to cgns and then you can use cgns to Edge format. http://cgns.sourceforge.net/Utilities.html