convert post.out to.plt

hudehfu · April 17, 2021, 00:17

Hello， everyone：

How do I convert POST.out file to .plt file which can be used in Tecplot. What software is needed?

Thanks

ksrivast · April 19, 2021, 18:08

Hello Tianyuan,

You can make use of our post_convert utility either through CONVERGE Studio, or obtain the executable from our Downloads website to run through the terminal. You can make use of this utility to convert CONVERGE specific post* files to Tecplot readable format.

Note that CONVERGE v3.0's post*h5 files can now be directly read in by Tecplot without the need for post_converting.

Sincerely,

April 17, 2021, 00:17	convert post.out to.plt	#1
hudehfu New Member tianyuan Xia Join Date: Apr 2021 Posts: 10 Rep Power: 5	Hello， everyone： How do I convert POST.out file to .plt file which can be used in Tecplot. What software is needed? Thanks

April 19, 2021, 18:08		#2
ksrivast Senior Member Kislaya Srivastava Join Date: Sep 2017 Location: Convergent Science, Northville MI Posts: 165 Rep Power: 9	Hello Tianyuan, You can make use of our post_convert utility either through CONVERGE Studio, or obtain the executable from our Downloads website to run through the terminal. You can make use of this utility to convert CONVERGE specific post* files to Tecplot readable format. Note that CONVERGE v3.0's posth5 files can now be directly read in by Tecplot without the need for post_converting. Sincerely, __________________ Kislaya Srivastava* Principal Research Engineer \| Applications CONVERGECFD

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Tool to convert OpenFoam mesh to SU2 mesh (2D and 3D)	Combas	SU2	45	October 16, 2024 18:26
[snappyHexMesh] Convert stl files and multi region	abrunet	OpenFOAM Meshing & Mesh Conversion	1	July 1, 2014 11:15
convert to structed mesh	ok___ko	Mesh Generation & Pre-Processing	0	April 22, 2013 06:23
convert a structured multiblock grid to an one unstructured: modification of cells	Mirage	ANSYS	0	July 18, 2012 10:14
ImageMagick will not convert jpg to mpg	musahossein	Main CFD Forum	1	December 2, 2011 11:44