ERROR: The adaptive zone model is on but H2O is not an active species

kri321shna · September 20, 2018, 12:24

Hi,

I am getting this below error even after adding H2O in species.

ERROR: The adaptive zone model is on but H2O is not an active species

what will be the solution for this ?

Thanks in advance.

Krishna

jlemoine · September 24, 2018, 10:25

Krishna,

Based on your description, it seems that the species h2o is missing from the mechanism that you are using. I would suggest taking a look at the mech.dat and therm.dat in your working directory and I would check if the species h2o is present in both of them. Thanks,

September 20, 2018, 12:24	ERROR: The adaptive zone model is on but H2O is not an active species	#1
kri321shna Member Krishna Join Date: Apr 2012 Posts: 54 Rep Power: 14	Hi, I am getting this below error even after adding H2O in species. ERROR: The adaptive zone model is on but H2O is not an active species what will be the solution for this ? Thanks in advance. Krishna

September 24, 2018, 10:25		#2
jlemoine Member Jerome Le Moine Join Date: Jan 2016 Location: Convergent Science, Madison WI Posts: 50 Rep Power: 10	Krishna, Based on your description, it seems that the species h2o is missing from the mechanism that you are using. I would suggest taking a look at the mech.dat and therm.dat in your working directory and I would check if the species h2o is present in both of them. Thanks, __________________ Jerome Le Moine Support/Application Engineer CONVERGECFD

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
How to find indexes of the species in species transport model	Nishant_Sharma	Fluent UDF and Scheme Programming	13	September 27, 2023 10:53
Error: Invalid cp (0.0000 J/kg K) detected (Species and dpm model used in fluent)	hive.cfd	FLUENT	4	September 12, 2022 04:47
Wrong flow in ratating domain problem	Sanyo	CFX	17	August 15, 2015 07:20
Journal file error	magicalmarshmallow	FLUENT	3	April 4, 2014 13:25
Sliding mesh error	Karl Kevala	FLUENT	4	February 21, 2001 16:52