water injection into air (spray)

dzinks0 · June 24, 2011, 17:31

hello everyone

This is my project.
I must do water dispersed into air.
I've done already continuous water. but how do dispersed?

I have no idea. Please let someone will help me

ghorrocks · June 25, 2011, 07:55

Things get a lot more complex in multiphase. For instance you have not specified what form the water is in - large globs, pools, a fine mist, large drops or vapour - you would model each of these with a different method.

dzinks0 · June 30, 2011, 18:25

I need a fine mist, but I do not know where I can choose the method?
It I set in the Workbench> CFX> setup?

ghorrocks · June 30, 2011, 19:41

Read the documentation about multiphase modelling and do the tutorials. There are many different approaches to multiphase modelling and you have to choose the correct one for your application - and unless you understand what you are modelling and the various options available you will not do a successful model.

rlamadri · February 16, 2012, 18:39

hi dzinks0
Which models and boundary conditions, did you use with continuous water?, please help me?

Thanks

February 16, 2012, 18:39	help	#5
rlamadri New Member Raúl Join Date: Apr 2011 Posts: 3 Rep Power: 15	hi dzinks0 Which models and boundary conditions, did you use with continuous water?, please help me? Thanks

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
water spray in hot air	krish	FLUENT	6	April 3, 2013 09:58
air bubble is disappear increasing time using vof	xujjun	CFX	9	June 9, 2009 08:59
water injection into air (not spray)	bioman66	CFX	1	July 11, 2006 07:34
Separation phenomenon of water, droplet and air	Raymond	CFX	0	July 9, 2004 23:59
Help!!!problems in air jet into water bath	kim	FLUENT	4	June 9, 2003 08:04

June 25, 2011, 07:55		#2
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,871 Rep Power: 144	Things get a lot more complex in multiphase. For instance you have not specified what form the water is in - large globs, pools, a fine mist, large drops or vapour - you would model each of these with a different method.

June 30, 2011, 18:25		#3
dzinks0 New Member zbigniew witkowski Join Date: Jun 2011 Posts: 2 Rep Power: 0	I need a fine mist, but I do not know where I can choose the method? It I set in the Workbench> CFX> setup?

June 30, 2011, 19:41		#4
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,871 Rep Power: 144	Read the documentation about multiphase modelling and do the tutorials. There are many different approaches to multiphase modelling and you have to choose the correct one for your application - and unless you understand what you are modelling and the various options available you will not do a successful model.