|
[Sponsors] |
![]() |
![]() |
#1 |
New Member
Luca
Join Date: Oct 2010
Posts: 3
Rep Power: 15 ![]() |
I'm using cfx to simulate the performance of an industrial axial fan
The two patches matched by the GGI have common shroud but different hub radius. The picture below shows the velocities contours on the bigger side of the interface .................................................. .................................................. .................................................. .................................................. .................................................. ................................... ![]() It is possible to see a band of zero speed close to the shroud but it is supposed to be in the hub zone. How is it possible to sort this misalignmet? I couldn't manage to work out this. Thaks in advance for your help. |
|
![]() |
![]() |
![]() |
![]() |
#2 |
Senior Member
Attesz
Join Date: Mar 2009
Location: Munich
Posts: 368
Rep Power: 17 ![]() |
Post your pictures again so we can understand your problem.
|
|
![]() |
![]() |
![]() |
![]() |
#3 |
New Member
Luca
Join Date: Oct 2010
Posts: 3
Rep Power: 15 ![]() |
These are the links to velcity plots in correspondance to the two sides
http://img263.imageshack.us/i/interfaceside1.jpg/ http://img832.imageshack.us/i/interfaceside2.jpg/ |
|
![]() |
![]() |
![]() |
Tags |
ggi misalignment |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Floating point exception error | Alan | OpenFOAM Running, Solving & CFD | 11 | July 1, 2021 21:51 |
Ggi | FabOr | OpenFOAM | 17 | May 9, 2013 10:19 |
Cyclic vs ggi vs directMapped Patches | jens_klostermann | OpenFOAM Running, Solving & CFD | 33 | May 3, 2013 02:45 |
Difference between ggi and overlapGgi? GGI Tips and Tricks? | philippose | OpenFOAM Running, Solving & CFD | 7 | January 16, 2013 09:40 |
GGI in OpenFOAM-1.5-dev | philippose | OpenFOAM Running, Solving & CFD | 14 | November 13, 2011 14:55 |