Need Help to Enable Wall Boiling Model in CFX

cjhaw · February 25, 2011, 02:15

Hi all,

I would like have the RPI Wall Boiling Model in CFX either CFX 11 or CFX 12. I realized that the model should exist in domain>Fluid Pair tab under mass transfer>Phase Change Model (just below Heat Transfer Coefficient Under Relaxation Factor). But it does not exist in my computer.

So here I would like to ask how can I have the model and hope that I can get your advice.

Thank you.

CJH

joey2007 · February 25, 2011, 14:17

Guess in 11 it was not there. If I correctly remind, it is there 12.1. Possibly you have to activate beta features.

cjhaw · February 26, 2011, 12:47

Quote:

Originally Posted by joey2007

Guess in 11 it was not there. If I correctly remind, it is there 12.1. Possibly you have to activate beta features.

Hi Joey,

Thank you for your reply. I had enabled the beta feature in edit>option. But the model still did not appear.

yasin.ramzani · September 26, 2013, 10:40

before searching for this model,
you should define at least two fluid in basic setting/fluid and particle definitions.
just below this in morphology section choose Droplets(phase change) for one of the fluid
hope this help you

February 25, 2011, 02:15	Need Help to Enable Wall Boiling Model in CFX	#1
cjhaw New Member Chong Jen Haw Join Date: Jun 2009 Posts: 6 Rep Power: 17	Hi all, I would like have the RPI Wall Boiling Model in CFX either CFX 11 or CFX 12. I realized that the model should exist in domain>Fluid Pair tab under mass transfer>Phase Change Model (just below Heat Transfer Coefficient Under Relaxation Factor). But it does not exist in my computer. So here I would like to ask how can I have the model and hope that I can get your advice. Thank you. CJH Last edited by cjhaw; February 25, 2011 at 02:31.

February 25, 2011, 14:17		#2
joey2007 Senior Member Join Date: Mar 2009 Location: Europe Posts: 169 Rep Power: 17	Guess in 11 it was not there. If I correctly remind, it is there 12.1. Possibly you have to activate beta features. __________________ - - - - - ------------------------------------------------------------------------ Please do not forget: I am not paid for answering your questions. Thousands of issues can cause a division by zero. Please do not capture a thread, with the argument: "I have the same issue ...."

September 26, 2013, 10:40	re: Need Help to Enable Wall Boiling Model in CFX	#4
yasin.ramzani New Member yasin ramzani Join Date: May 2011 Posts: 5 Rep Power: 15	before searching for this model, you should define at least two fluid in basic setting/fluid and particle definitions. just below this in morphology section choose Droplets(phase change) for one of the fluid hope this help you

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
RPI Wall Boiling Problem	aliemadi	CFX	4	September 1, 2018 22:14
RPI wall boiling model	bogesz	CFX	4	January 4, 2013 03:35
Problem importing watertight model into CFX	djk1301	ANSYS	3	February 1, 2011 23:04
Near wall treatment for k-e model	raik	Main CFD Forum	3	May 6, 2007 08:51
Multicomponent fluid	Andrea	CFX	2	October 11, 2004 06:12