Remote access to a Linux machine

faisal_durr · July 28, 2010, 06:24

Hi to all you experts out there,

I have currently got CFX installed on a powerful LINUX machine. I am trying to access it through my laptop that has windows installed on it. I am using Xming and Putty for the remote access. I do get the CFX software up and running on my laptop but the graphics are pretty slow. For instance if i try to re-orient a model on my laptop it takes approx. 4 to 5 seconds before it changes orientation. I know many of you might be thinking that i need to upgrade my graphics card but i checked this on a very very very powerful graphic card machine too and the problem was still there. Any idea what i should do guys?

mvoss · July 28, 2010, 07:07

hi,
how is your laptop connected to the powerful linux machine? did you enable x11 forwarding? it´s some time ago but did you set up the display:: on Linux?

neewbie

faisal_durr · July 28, 2010, 07:51

Yeah i did enable the X9 forwarding and the ':0' and im trying to connect to LINUX machine via a university network.... The graphics are slow :-(

faisal_durr · July 28, 2010, 07:52

* correction i enabled the X11 forwarding.

July 28, 2010, 06:24	Remote access to a Linux machine	#1
faisal_durr Member Faisal Durrani Join Date: Nov 2009 Location: England Posts: 62 Rep Power: 17	Hi to all you experts out there, I have currently got CFX installed on a powerful LINUX machine. I am trying to access it through my laptop that has windows installed on it. I am using Xming and Putty for the remote access. I do get the CFX software up and running on my laptop but the graphics are pretty slow. For instance if i try to re-orient a model on my laptop it takes approx. 4 to 5 seconds before it changes orientation. I know many of you might be thinking that i need to upgrade my graphics card but i checked this on a very very very powerful graphic card machine too and the problem was still there. Any idea what i should do guys?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Problem with UDF on a Linux machine (Red Hat)	Iaroslav	Fluent UDF and Scheme Programming	6	March 7, 2017 14:15
fluent UDF on linux machine	Min-Hua Wang	Fluent UDF and Scheme Programming	6	June 29, 2013 09:41
Running icepak on a linux machine	Codemaster	FLUENT	0	November 20, 2008 01:50
Distributed Parallel on dual core remote machine	Justin	CFX	1	February 3, 2008 18:23
Please help cannot start lamboot	hsieh	OpenFOAM Installation	8	May 24, 2007 15:44

July 28, 2010, 07:07		#2
mvoss Senior Member Matthias Voß Join Date: Mar 2009 Location: Berlin, Germany Posts: 449 Rep Power: 20	hi, how is your laptop connected to the powerful linux machine? did you enable x11 forwarding? it´s some time ago but did you set up the display:: on Linux? neewbie

July 28, 2010, 07:51		#3
faisal_durr Member Faisal Durrani Join Date: Nov 2009 Location: England Posts: 62 Rep Power: 17	Yeah i did enable the X9 forwarding and the ':0' and im trying to connect to LINUX machine via a university network.... The graphics are slow :-(

July 28, 2010, 07:52		#4
faisal_durr Member Faisal Durrani Join Date: Nov 2009 Location: England Posts: 62 Rep Power: 17	* correction i enabled the X11 forwarding.