mass convergency problem

c120613 · May 25, 2010, 07:16

Dear all,

I'm running simulations for rotor 37 but I have the convergence problem in particular related with the mass equations RMS. The other residuals seem okay.

Do you have an idea which parameter I have to vary in order to have the convergency.

The simulations are run in steady conditions where the blade turns at -1800 RPM and the shroud turns at +1800 RPM. The value of the mass flow is equal around 0,57 kg/sec per passage.

Please let me know how I can fix this problem and if you need some other numerical details let me know as well.

Kind regards

DD

ghorrocks · May 25, 2010, 08:20

Have you read in the documentation about obtaining convergence? Also have a look at the FAQ in this forum (http://www.cfd-online.com/Wiki/Ansys_FAQ).

May 25, 2010, 07:16	mass convergency problem	#1
c120613 Member Domenico Join Date: Sep 2009 Location: Cranfield Posts: 48 Rep Power: 17	Dear all, I'm running simulations for rotor 37 but I have the convergence problem in particular related with the mass equations RMS. The other residuals seem okay. Do you have an idea which parameter I have to vary in order to have the convergency. The simulations are run in steady conditions where the blade turns at -1800 RPM and the shroud turns at +1800 RPM. The value of the mass flow is equal around 0,57 kg/sec per passage. Please let me know how I can fix this problem and if you need some other numerical details let me know as well. Kind regards DD

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
PROBLEM: Scalar mass fraction	Lorenzo	Siemens	1	July 14, 2008 04:50
how to solve the mass loss problem of level set?	Jane	Main CFD Forum	0	March 14, 2007 08:41
mass transfer problem	Mike	CFX	0	May 11, 2005 07:46
CFX-Post: problem with mass flow	Markus	CFX	5	February 19, 2005 18:30
Residual Problem -Mass Imbalance	Jie	FLUENT	0	February 19, 2002 11:49

May 25, 2010, 08:20		#2
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,844 Rep Power: 144	Have you read in the documentation about obtaining convergence? Also have a look at the FAQ in this forum (http://www.cfd-online.com/Wiki/Ansys_FAQ).