CFX not compatible with Window 7 & how to generate table

mechovator · January 6, 2010, 05:19

Hello dear

1. I have installed Window 7 and CFX is not working with it. Means its not compatible. So if any one know the solution to the problem pls do tell me.

2. I want to generate table of absolute pressure varying in the Y direction (the depth of the reservoir) in a reservoir in CFX post. I went through tutorial in which table was created in post processing but was not able to understand it completely. So pls if any of you are aware of the method pls write in numbered bullet form.

Regards

Mechovator

Attesz · January 6, 2010, 07:59

I'm using v11 on win7 x64, and its working fine. I get some problems with licensing, when i've installed the new antivirus software, the new firewall was too "strong". Check the firewall!

ckleanth · January 6, 2010, 16:54

http://www.ansys.com/services/ss-platform-support.asp

kingjewel1 · January 7, 2010, 09:15

Quote:

Originally Posted by mechovator

Hello dear

1. I have installed Window 7 and CFX is not working with it. Means its not compatible. So if any one know the solution to the problem pls do tell me.

2. I want to generate table of absolute pressure varying in the Y direction (the depth of the reservoir) in a reservoir in CFX post. I went through tutorial in which table was created in post processing but was not able to understand it completely. So pls if any of you are aware of the method pls write in numbered bullet form.

Regards

Mechovator

Version 11 32bit works fine on windows 7 31bit. The problem you're experiencing no doubt is that you're trying to use a 32bit CFX on 64bit windows, which doesn't work.

mechovator · January 13, 2010, 07:11

2. I want to generate table of absolute pressure varying in the Y direction (the depth of the reservoir) in a reservoir in CFX post. I went through tutorial in which table was created in post processing but was not able to understand it completely. So pls if any of you are aware of the method pls write in numbered bullet form.

kingjewel1 · January 14, 2010, 07:51

Quote:

Originally Posted by mechovator

2. I want to generate table of absolute pressure varying in the Y direction (the depth of the reservoir) in a reservoir in CFX post. I went through tutorial in which table was created in post processing but was not able to understand it completely. So pls if any of you are aware of the method pls write in numbered bullet form.

I don't know the method of which you speak per say. However by creating various lines along a constant X axis. ie. Location>line. Samples >100
you can plot the chart (making a new chart line for each line) using these. perhaps more fiddly but does the same.

January 6, 2010, 05:19	CFX not compatible with Window 7 & how to generate table	#1
mechovator Member mechovator Join Date: May 2009 Posts: 32 Rep Power: 17	Hello dear 1. I have installed Window 7 and CFX is not working with it. Means its not compatible. So if any one know the solution to the problem pls do tell me. 2. I want to generate table of absolute pressure varying in the Y direction (the depth of the reservoir) in a reservoir in CFX post. I went through tutorial in which table was created in post processing but was not able to understand it completely. So pls if any of you are aware of the method pls write in numbered bullet form. Regards Mechovator

January 6, 2010, 16:54		#3
ckleanth Senior Member George Join Date: Mar 2009 Location: Birmingham, UK Posts: 257 Rep Power: 18	http://www.ansys.com/services/ss-platform-support.asp __________________ Top 4 tips 1. Knowledge is everything and Ignorance is dangerous. 2. Understand your limitations and try to eliminate them. 3. Get yerself a bike and hoon the chuffer. You will soon learn why dogs like to hang their heads out the car window. 4. Please before asking any questions on how to run simulations in CFX, go though all the tutorials

January 13, 2010, 07:11	Please also reply to the second query	#5
mechovator Member mechovator Join Date: May 2009 Posts: 32 Rep Power: 17	2. I want to generate table of absolute pressure varying in the Y direction (the depth of the reservoir) in a reservoir in CFX post. I went through tutorial in which table was created in post processing but was not able to understand it completely. So pls if any of you are aware of the method pls write in numbered bullet form.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Pros and Cons for CFX, CFdesign, COMSOL	Val	Main CFD Forum	3	June 10, 2011 03:20
Is Ansys compatible with Window Vista? If yes then	NITIN DEWANGAN	CFX	2	July 13, 2008 19:18
CFX Post Table Generation	Claudia	CFX	1	July 25, 2006 08:32
Can CFX Automatically generate hybrid meshes?	JJ	CFX	0	August 28, 2003 22:18
CFX 4.4 installation problem	Pandu Sattvika	CFX	1	December 1, 2001 05:07

January 6, 2010, 07:59		#2
Attesz Senior Member Attesz Join Date: Mar 2009 Location: Munich Posts: 368 Rep Power: 17	I'm using v11 on win7 x64, and its working fine. I get some problems with licensing, when i've installed the new antivirus software, the new firewall was too "strong". Check the firewall!