CFX SOLVER error !!!

mehrdadeng · November 8, 2009, 16:38

when cfx solver run the error below is displayed:

Cfx_001 has terminated error.
No result file available

and error below is displayed in workbench:

Cfx solver for system cfx did not produce a result file.detailed information can be found in the out put file ,for the run,which can be viewed by selecting display monitors from thesolution cell.cell c3

and solution terminated.

this error is displayed when one or more parameter of cfx pre has changed and cfx solver run again

how can solve this error???

mehrdadeng · November 11, 2009, 06:25

are there one to remark?

ghorrocks · November 11, 2009, 21:02

Describing what you are trying to do might help. While you are at it include the CCL and more of the output file to put the error in context.

mehrdadeng · November 23, 2009, 17:42

i put complete information about my simulation in below topic:

http://www.cfd-online.com/Forums/cfx...tml#post237403

i will put out file earliest

November 8, 2009, 16:38	CFX SOLVER error !!!	#1
mehrdadeng Member mohsen Join Date: Mar 2009 Posts: 53 Rep Power: 17	when cfx solver run the error below is displayed: Cfx_001 has terminated error. No result file available and error below is displayed in workbench: Cfx solver for system cfx did not produce a result file.detailed information can be found in the out put file ,for the run,which can be viewed by selecting display monitors from thesolution cell.cell c3 and solution terminated. this error is displayed when one or more parameter of cfx pre has changed and cfx solver run again how can solve this error??? Last edited by mehrdadeng; November 11, 2009 at 06:23.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[OpenFOAM] Native ParaView Reader Bugs	tj22	ParaView	270	January 4, 2016 12:39
Problem with compile the setParabolicInlet	ivanyao	OpenFOAM Running, Solving & CFD	6	September 5, 2008 21:50
error #001100279 in MEMERR in CFX Solver 5.7.1 SP1	Lionel BRUYERE	CFX	3	November 23, 2006 06:02
Error in CFX Solver - reg	Fredrick	CFX	1	March 5, 2005 02:41
Problems of Duns Codes!	Martin J	Main CFD Forum	8	August 15, 2003 00:19

November 11, 2009, 06:25		#2
mehrdadeng Member mohsen Join Date: Mar 2009 Posts: 53 Rep Power: 17	are there one to remark?

November 11, 2009, 21:02		#3
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,871 Rep Power: 144	Describing what you are trying to do might help. While you are at it include the CCL and more of the output file to put the error in context.

November 23, 2009, 17:42		#4
mehrdadeng Member mohsen Join Date: Mar 2009 Posts: 53 Rep Power: 17	i put complete information about my simulation in below topic: http://www.cfd-online.com/Forums/cfx...tml#post237403 i will put out file earliest