Error #001100279

bharath · October 10, 2009, 09:35

hi to all,

can anybody help me to resolve this error.thanks in advance

+--------------------------------------------------------------------+
| ERROR #001100279 has occurred in subroutine ErrAction. |
| Message: |
| read_compressed_dataarray: offset 4707459271968572714 too large f- |
| or integer,
would be written as 1145980202. Possibly compressed |
| chunk >2Gb. |
| |
| |
| |
+--------------------------------------------------------------------+

+--------------------------------------------------------------------+
| ERROR #001100279 has occurred in subroutine ErrAction. |
| Message: |
| iocnt: read data failed |
| |
| |
| |
| |
| |
+--------------------------------------------------------------------+

+--------------------------------------------------------------------+
| ERROR #001100279 has occurred in subroutine ErrAction. |
| Message: |
| APPEND_TRACK_VAR Failed to read data |
| WHAT=G/TRACK_TOPOL_PT1 WHERE=ZN1- |
| |
| |
| |
| |
+--------------------------------------------------------------------+

+--------------------------------------------------------------------+
| ERROR #001100279 has occurred in subroutine ErrAction. |
| Message: |
| write_index: warning: new index not at end of file, file may be b- |
| ad |
| |
| |
| |
| |
+--------------------------------------------------------------------+

+--------------------------------------------------------------------+
| Writing crash recovery file |
+--------------------------------------------------------------------+

+--------------------------------------------------------------------+
| ERROR #001100279 has occurred in subroutine ErrAction. |
| Message: |
| Stopped in routine APPEND_TRACK_VAR |
| |
| |
| |
| |
| |
+--------------------------------------------------------------------+

+--------------------------------------------------------------------+
| An error has occurred in cfx5solve: |
| |
| The ANSYS CFX solver exited with return code 1. |
+--------------------------------------------------------------------+

End of solution stage.

+--------------------------------------------------------------------+
| The following transient and backup files written by the ANSYS CFX |
| solver have been saved in the directory |
| /home/CFX/Bharath/Others/Wang/run/cyclone_29.9_026: |
| |
| 200.trn |
+--------------------------------------------------------------------+

+--------------------------------------------------------------------+
| An error has occurred in cfx5solve: |
| |
| Error reported by IO module: create_indextable: stored index is |
| wrong: missing start tag |
+--------------------------------------------------------------------+

+--------------------------------------------------------------------+
| An error has occurred in cfx5solve: |
| |
| Error reported by IO module: iif_open: unable to read the stored |
| index, attempting to rebuild it |
+--------------------------------------------------------------------+

+--------------------------------------------------------------------+
| An error has occurred in cfx5solve: |
| |
| Error reported by IO module: recreate_indextable: warning: file |
| was not closed correctly, data may be inconsistent |
+--------------------------------------------------------------------+

+--------------------------------------------------------------------+
| An error has occurred in cfx5solve: |
| |
| Error reported by IO module: write_index: warning: new index not |
| at end of file, file may be bad |
+--------------------------------------------------------------------+

+--------------------------------------------------------------------+
| An error has occurred in cfx5solve: |
| |
| Error reported by IO module: create_indextable: stored index is |
| wrong: missing start tag |
+--------------------------------------------------------------------+

+--------------------------------------------------------------------+
| An error has occurred in cfx5solve: |
| |
| Error reported by IO module: iif_open: unable to read the stored |
| index, attempting to rebuild it |
+--------------------------------------------------------------------+

+--------------------------------------------------------------------+
| An error has occurred in cfx5solve: |
| |
| Error reported by IO module: recreate_indextable: warning: file |
| was not closed correctly, data may be inconsistent |
+--------------------------------------------------------------------+

+--------------------------------------------------------------------+
| The results from this run of the ANSYS CFX Solver have been |
| written to /home/CFX/Bharath/Others/Wang/run/cyclone_29.9_026.res |
+--------------------------------------------------------------------+

+--------------------------------------------------------------------+
| Warning! |
| |
| The ANSYS CFX Solver has written a crash recovery file. This file |
| has been saved as |
| /home/CFX/Bharath/Others/Wang/run/cyclone_29.9_026.res.err and may |
| be an aid to diagnosing the problem or restarting the run. More |
| details should be available in the solver output section of the |
| output file. |
+--------------------------------------------------------------------+

+--------------------------------------------------------------------+
| The following user files have been saved in the directory |
| /home/CFX/Bharath/Others/Wang/run/cyclone_29.9_026: |
| |
| PT1.trk |
+--------------------------------------------------------------------+

This run of the ANSYS CFX Solver has finished.

ghorrocks · October 11, 2009, 06:09

Seems pretty obvious to me. The file you are trying to write, I assume a particle tracking file is very large. Try recording less particle tracks or moving to a 64 bit OS.

bharath · October 11, 2009, 09:00

thanks glenn,

i will try your solution. but am trying to simulate only (400 particles/sec) whether it cause problem and now the simulation time is only (.25sec)

ghorrocks · October 11, 2009, 18:38

The number of points in the tracking file = average number of points * timestep * residence time. Reduce any of these numbers and you will reduce the size of the particle tracks file.

bharath · October 12, 2009, 12:36

thanks glenn.

could you explain me little bit more. i couldn't able to reduce the time step and
residence time is not in my hands.then what i can do now?

ghorrocks · October 12, 2009, 19:16

Isn't that obvious? The only thing left is to reduce the number of particles.

ghorrocks · October 18, 2009, 08:09

??? What's to say? Isn't that equation obvious?

gaza · March 25, 2015, 05:49

Hi Glen
I have got such message:

write_index: warning: new index not at end of file, file may be b- |
| ad

but my simulation is running. Is it an error or everything is ok?
best regards
pblasiak

gaza · March 25, 2015, 05:51

and one more thing
I had not have a res fike only trn. So I changed the extension from trn to res and used this file as initial condition.
best regards
pblasiak

ghorrocks · March 25, 2015, 06:31

I would be suspicious that your output file (either output, results or particle file) is corrupt and will be unreadable.

I would save a backup file and check all the key output files to see if they are OK.

October 10, 2009, 09:35	Error #001100279	#1
bharath Senior Member Bharath kumar Join Date: Apr 2009 Posts: 169 Rep Power: 17	hi to all, can anybody help me to resolve this error.thanks in advance +--------------------------------------------------------------------+ \| ERROR #001100279 has occurred in subroutine ErrAction. \| \| Message: \| \| read_compressed_dataarray: offset 4707459271968572714 too large f- \| \| or integer, would be written as 1145980202. Possibly compressed \| \| chunk >2Gb. \| \| \| \| \| \| \| +--------------------------------------------------------------------+ +--------------------------------------------------------------------+ \| ERROR #001100279 has occurred in subroutine ErrAction. \| \| Message: \| \| iocnt: read data failed \| \| \| \| \| \| \| \| \| \| \| +--------------------------------------------------------------------+ +--------------------------------------------------------------------+ \| ERROR #001100279 has occurred in subroutine ErrAction. \| \| Message: \| \| APPEND_TRACK_VAR Failed to read data \| \| WHAT=G/TRACK_TOPOL_PT1 WHERE=ZN1- \| \| \| \| \| \| \| \| \| +--------------------------------------------------------------------+ +--------------------------------------------------------------------+ \| ERROR #001100279 has occurred in subroutine ErrAction. \| \| Message: \| \| write_index: warning: new index not at end of file, file may be b- \| \| ad \| \| \| \| \| \| \| \| \| +--------------------------------------------------------------------+ +--------------------------------------------------------------------+ \| Writing crash recovery file \| +--------------------------------------------------------------------+ +--------------------------------------------------------------------+ \| ERROR #001100279 has occurred in subroutine ErrAction. \| \| Message: \| \| Stopped in routine APPEND_TRACK_VAR \| \| \| \| \| \| \| \| \| \| \| +--------------------------------------------------------------------+ +--------------------------------------------------------------------+ \| An error has occurred in cfx5solve: \| \| \| \| The ANSYS CFX solver exited with return code 1. \| +--------------------------------------------------------------------+ End of solution stage. +--------------------------------------------------------------------+ \| The following transient and backup files written by the ANSYS CFX \| \| solver have been saved in the directory \| \| /home/CFX/Bharath/Others/Wang/run/cyclone_29.9_026: \| \| \| \| 200.trn \| +--------------------------------------------------------------------+ +--------------------------------------------------------------------+ \| An error has occurred in cfx5solve: \| \| \| \| Error reported by IO module: create_indextable: stored index is \| \| wrong: missing start tag \| +--------------------------------------------------------------------+ +--------------------------------------------------------------------+ \| An error has occurred in cfx5solve: \| \| \| \| Error reported by IO module: iif_open: unable to read the stored \| \| index, attempting to rebuild it \| +--------------------------------------------------------------------+ +--------------------------------------------------------------------+ \| An error has occurred in cfx5solve: \| \| \| \| Error reported by IO module: recreate_indextable: warning: file \| \| was not closed correctly, data may be inconsistent \| +--------------------------------------------------------------------+ +--------------------------------------------------------------------+ \| An error has occurred in cfx5solve: \| \| \| \| Error reported by IO module: write_index: warning: new index not \| \| at end of file, file may be bad \| +--------------------------------------------------------------------+ +--------------------------------------------------------------------+ \| An error has occurred in cfx5solve: \| \| \| \| Error reported by IO module: create_indextable: stored index is \| \| wrong: missing start tag \| +--------------------------------------------------------------------+ +--------------------------------------------------------------------+ \| An error has occurred in cfx5solve: \| \| \| \| Error reported by IO module: iif_open: unable to read the stored \| \| index, attempting to rebuild it \| +--------------------------------------------------------------------+ +--------------------------------------------------------------------+ \| An error has occurred in cfx5solve: \| \| \| \| Error reported by IO module: recreate_indextable: warning: file \| \| was not closed correctly, data may be inconsistent \| +--------------------------------------------------------------------+ +--------------------------------------------------------------------+ \| The results from this run of the ANSYS CFX Solver have been \| \| written to /home/CFX/Bharath/Others/Wang/run/cyclone_29.9_026.res \| +--------------------------------------------------------------------+ +--------------------------------------------------------------------+ \| Warning! \| \| \| \| The ANSYS CFX Solver has written a crash recovery file. This file \| \| has been saved as \| \| /home/CFX/Bharath/Others/Wang/run/cyclone_29.9_026.res.err and may \| \| be an aid to diagnosing the problem or restarting the run. More \| \| details should be available in the solver output section of the \| \| output file. \| +--------------------------------------------------------------------+ +--------------------------------------------------------------------+ \| The following user files have been saved in the directory \| \| /home/CFX/Bharath/Others/Wang/run/cyclone_29.9_026: \| \| \| \| PT1.trk \| +--------------------------------------------------------------------+ This run of the ANSYS CFX Solver has finished.

October 11, 2009, 06:09		#2
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,872 Rep Power: 144	Seems pretty obvious to me. The file you are trying to write, I assume a particle tracking file is very large. Try recording less particle tracks or moving to a 64 bit OS.

October 11, 2009, 09:00		#3
bharath Senior Member Bharath kumar Join Date: Apr 2009 Posts: 169 Rep Power: 17	thanks glenn, i will try your solution. but am trying to simulate only (400 particles/sec) whether it cause problem and now the simulation time is only (.25sec)

October 11, 2009, 18:38		#4
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,872 Rep Power: 144	The number of points in the tracking file = average number of points * timestep * residence time. Reduce any of these numbers and you will reduce the size of the particle tracks file.

October 12, 2009, 12:36		#5
bharath Senior Member Bharath kumar Join Date: Apr 2009 Posts: 169 Rep Power: 17	thanks glenn. could you explain me little bit more. i couldn't able to reduce the time step and residence time is not in my hands.then what i can do now?

October 12, 2009, 19:16		#6
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,872 Rep Power: 144	Isn't that obvious? The only thing left is to reduce the number of particles.

October 18, 2009, 08:09		#7
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,872 Rep Power: 144	??? What's to say? Isn't that equation obvious?

March 25, 2015, 05:49		#8
gaza Senior Member Przemek Join Date: Jun 2011 Posts: 249 Rep Power: 16	Hi Glen I have got such message: write_index: warning: new index not at end of file, file may be b- \| \| ad but my simulation is running. Is it an error or everything is ok? best regards pblasiak

March 25, 2015, 05:51		#9
gaza Senior Member Przemek Join Date: Jun 2011 Posts: 249 Rep Power: 16	and one more thing I had not have a res fike only trn. So I changed the extension from trn to res and used this file as initial condition. best regards pblasiak

March 25, 2015, 06:31		#10
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,872 Rep Power: 144	I would be suspicious that your output file (either output, results or particle file) is corrupt and will be unreadable. I would save a backup file and check all the key output files to see if they are OK.