|
[Sponsors] |
April 28, 2009, 14:01 |
cfx mesh loading problem
|
#1 |
New Member
uk jha
Join Date: Apr 2009
Posts: 16
Rep Power: 17 |
i m solving the turbo machinery problem through cfx11.0. i created my mesh in the icem cfd. i want to import the mesh in cfx11.0. but it is not supporting.
any suggestions. thanks. jha |
|
April 28, 2009, 23:59 |
|
#2 |
Member
Tristan Burton
Join Date: Mar 2009
Posts: 43
Rep Power: 17 |
Not sure exactly what is wrong here since you don't give much detail. I use icem to write out a cfx5 file which I can then import into CFX-Pre using Import Mesh. You have to change the file type to cfx5 when you do the import so that it can recognize your mesh.
Are you getting some sort of error message when you do this? Tristan |
|
April 29, 2009, 05:55 |
cfx icemcfd meshing turbomachinery
|
#3 |
New Member
uk jha
Join Date: Apr 2009
Posts: 16
Rep Power: 17 |
thanks for response.
i am using the icem cfd as i created the mesh and i saved it in *.uns form so there is no file is generated in *.cfx *.mesh form. there is only *.uns file is created. i may be making some mistake in saving in icemcfd. so that tell me in which form i should save the mesh. please go thruogh the icem cfd and make sure whether i am right or wrong. thanks u k jha |
|
April 29, 2009, 13:41 |
|
#4 |
Member
Tristan Burton
Join Date: Mar 2009
Posts: 43
Rep Power: 17 |
After you finish making your mesh, click the Output tab above the display window, click on the tool box icon (Select solver) underneath the Output tab (far left icon) and set the Output Solver to ANSYS CFX and click OK. Next click the icon with a disk and a mesh (Write input) underneath the Output tab (far right icon) and set the Output CFX5 file name. Since you selected the solver as ANSYS CFX it will write a .cfx5 file which can then be imported into CFX Pre.
Tristan |
|
Tags |
cfx11.0, icem cfd, mesh, turbo machinery |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Moving mesh | Niklas Wikstrom (Wikstrom) | OpenFOAM Running, Solving & CFD | 122 | June 15, 2014 07:20 |
fluent add additional zones for the mesh file | SSL | FLUENT | 2 | January 26, 2008 12:55 |
CFX mesh cause software blocked | ahlo | CFX | 3 | December 13, 2007 14:34 |
hex mesh using cfx mesh. | mehul | CFX | 3 | December 12, 2005 23:06 |
ICEM CFD 5.0 - CFX mesh problem | NeedHelp | CFX | 2 | January 4, 2005 14:45 |