Tutorial 17: Unable to run the simulation

Mazen · April 16, 2009, 09:28

Dear all,
I would be most grateful if anyone could help me with this problem:

I am working on tutorial 17: Air conditioning simulation. I follow all the instructions in this tutorial, but when I start run the simulation I got error message (Error message number: 001100279) the message says: unable to find library winnt/TStat_Control.dll on path.........(my working directory). Then under problem report, the message says: “USER ROUTINE: Thermostat Routine could not be loaded. Please check the Library Path, Library Name and Calling Name. For FORTRAN user routines, the Calling Name should be in lower case”. I check the library path, library name and calling name (the calling name is in lower case) and everything seems ok. Note than I have copied the subroutine TStat_Control.F to my working directory. Also, I’d like you to know that I have Salford Fortran (FTN95) compiler installed in my PC.

Looking forward to hearing from you.

Best Regards

Mazen

Chilli83 · April 16, 2009, 09:49

I think that I once heard no space and that "-" is bad choice when giving names.

Michael

Mazen · April 16, 2009, 10:07

Hi Michael, Thanks for your reply. I am sorry I did not get your point! Would you please make it clear for me.

Regards

Mazen

Mazen · April 16, 2009, 11:53

Message has been deleated by Mazen

ghorrocks · April 16, 2009, 19:22

Hi,

Chilli means that you should select a file name without special characters (-, _, & etc). Change the file name to TStatControl.F or something like that.

Also your fortran compiler is not the supported one. If you use a non-supported compiler then you can get weird errors so I recommend you change to the supported compiler.

Glenn Horrocks

Mazen · April 17, 2009, 08:34

Hi Glenn
Thanks for your reply and help. It means that when I copy the file (TStat_Control.F) from the ANSYS example, I paste it in my working directory without underscore (TStatControl.F). Another thing, would you please tell me which Fortran compiler should be installed in my system?

I appreciate your help in advance

Best wishes

Mazen

Mazen · April 17, 2009, 08:44

Quote:

Originally Posted by Mazen

Hi Michael, Thanks for your reply. I am sorry I did not get your point! Would you please make it clear for me.

Regards

Mazen

Hi Michael

your point now is very clear and very helpful.
thank you

Best Regards

Mazen

rogbrito · April 17, 2009, 10:02

Hi Sir,

take a look on my simulation. Are you using Intel Fortran 9.0/9.1 as your FORTRAN compilar. Good lucky Sir.

http://www.4shared.com/file/72198900...tionpart1.html

http://www.4shared.com/file/72199871...tionpart2.html

With king regards,

Rogerio Fernandes Brito

Mazen · April 17, 2009, 13:22

Dear Rogerio,

Thank you so much for your support. Currently, I’m downloading your files.
Unfortunately, I am not using Intel Fortran 9.0/9.1. The one installed on my system is Salford Fortran (FTN95) compiler. Do I have to have the former one installed on my system in order to run the simulation?

Best wishes

Mazen

rogbrito · April 17, 2009, 21:15

h t t p : / / w w w . cfd-online . com / Forums/cfx/22898-cfx-10-user-routine-not-fortran.html#post77655

take a look!

April 16, 2009, 09:28	Tutorial 17: Unable to run the simulation	#1
Mazen New Member Mazen Join Date: Apr 2009 Posts: 9 Rep Power: 17	Dear all, I would be most grateful if anyone could help me with this problem: I am working on tutorial 17: Air conditioning simulation. I follow all the instructions in this tutorial, but when I start run the simulation I got error message (Error message number: 001100279) the message says: unable to find library winnt/TStat_Control.dll on path.........(my working directory). Then under problem report, the message says: “USER ROUTINE: Thermostat Routine could not be loaded. Please check the Library Path, Library Name and Calling Name. For FORTRAN user routines, the Calling Name should be in lower case”. I check the library path, library name and calling name (the calling name is in lower case) and everything seems ok. Note than I have copied the subroutine TStat_Control.F to my working directory. Also, I’d like you to know that I have Salford Fortran (FTN95) compiler installed in my PC. Looking forward to hearing from you. Best Regards Mazen Last edited by Mazen; April 16, 2009 at 11:33.

April 16, 2009, 11:53		#4
Mazen New Member Mazen Join Date: Apr 2009 Posts: 9 Rep Power: 17	Message has been deleated by Mazen Last edited by Mazen; April 17, 2009 at 08:41.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
HVAC Simulation	David	CFX	2	March 11, 2009 16:46
Fluent Remote Simulation Facility Service (RSF) di	Rami	FLUENT	2	June 4, 2008 06:38
Compare stressedFoam and stressFemFoam in tutorial case plateHole	weijing	OpenFOAM Running, Solving & CFD	0	April 13, 2006 23:59
problems with LES run	Tim	CFX	1	February 27, 2006 08:28
Procedure to run unsteady simulation?	STN	Main CFD Forum	2	February 16, 2002 05:37

April 16, 2009, 09:49		#2
Chilli83 New Member Michael Join Date: Apr 2009 Posts: 20 Rep Power: 17	I think that I once heard no space and that "-" is bad choice when giving names. Michael

April 16, 2009, 10:07		#3
Mazen New Member Mazen Join Date: Apr 2009 Posts: 9 Rep Power: 17	Hi Michael, Thanks for your reply. I am sorry I did not get your point! Would you please make it clear for me. Regards Mazen

April 16, 2009, 19:22		#5
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,844 Rep Power: 144	Hi, Chilli means that you should select a file name without special characters (-, _, & etc). Change the file name to TStatControl.F or something like that. Also your fortran compiler is not the supported one. If you use a non-supported compiler then you can get weird errors so I recommend you change to the supported compiler. Glenn Horrocks

April 17, 2009, 08:34		#6
Mazen New Member Mazen Join Date: Apr 2009 Posts: 9 Rep Power: 17	Hi Glenn Thanks for your reply and help. It means that when I copy the file (TStat_Control.F) from the ANSYS example, I paste it in my working directory without underscore (TStatControl.F). Another thing, would you please tell me which Fortran compiler should be installed in my system? I appreciate your help in advance Best wishes Mazen

April 17, 2009, 10:02		#8
rogbrito Senior Member Jack Join Date: Mar 2009 Posts: 106 Rep Power: 16	Hi Sir, take a look on my simulation. Are you using Intel Fortran 9.0/9.1 as your FORTRAN compilar. Good lucky Sir. http://www.4shared.com/file/72198900...tionpart1.html http://www.4shared.com/file/72199871...tionpart2.html With king regards, Rogerio Fernandes Brito

April 17, 2009, 13:22		#9
Mazen New Member Mazen Join Date: Apr 2009 Posts: 9 Rep Power: 17	Dear Rogerio, Thank you so much for your support. Currently, I’m downloading your files. Unfortunately, I am not using Intel Fortran 9.0/9.1. The one installed on my system is Salford Fortran (FTN95) compiler. Do I have to have the former one installed on my system in order to run the simulation? Best wishes Mazen

April 17, 2009, 21:15		#10
rogbrito Senior Member Jack Join Date: Mar 2009 Posts: 106 Rep Power: 16	h t t p : / / w w w . cfd-online . com / Forums/cfx/22898-cfx-10-user-routine-not-fortran.html#post77655 take a look!