CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

Volumetric source or Inlet source

Register Blogs Community New Posts Updated Threads Search

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   May 12, 2008, 10:33
Default Volumetric source or Inlet source
  #1
Kumar
Guest
 
Posts: n/a
Guys.

I am trying to model Hydrogen dispersion from a box using CFX11. I know how much H2 release from the box. can I define as a volumetric source or inlet source. Which is the correct method ???

If I define as a volumetric source, do I get H2 concentration(v/v) which is always less than initial volumetric source concentration (v/v).

Thanks for your help.

Best Regards Kumar

  Reply With Quote

Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
wmake compiling new solver mksca OpenFOAM Programming & Development 14 June 22, 2018 07:29
[swak4Foam] swak4foam building problem GGerber OpenFOAM Community Contributions 54 April 24, 2015 17:02
Adding volumetric Source Term mohanamuraly OpenFOAM 0 May 17, 2009 23:00
DecomposePar links against liblamso0 with OpenMPI jens_klostermann OpenFOAM Bugs 11 June 28, 2007 18:51
Inlet condition represented by source term? tony FLUENT 0 January 20, 2006 00:47


All times are GMT -4. The time now is 06:59.