creat a new material -blood in CFX-pre HELP!

May 7, 2008, 00:38

anybody who can tell me how to creat a material such as blood as Fixed Composition Mixture ? looking forwards!

May 7, 2008, 08:32

Right-click on "Materials" and add new. Use this to create all the necessary components of the mixture. Then create a new mixture in the same way, but this time choose "Fixed Composition Mixture". For the components, click the button next to the components list to bring up a list of all the materials. Hold Ctrl and click on all of the components to select. Fill out all the necessary options.

May 11, 2008, 01:57

Thanks sincerely ! i'll try

hesamking · March 29, 2012, 15:42

dear Sir,
Could you be able to create blood in CFX?
could you please explain what you did and what components you took?
Regards,
Hesam

cpkewat · January 8, 2013, 15:14

I working with ANSYS CFX. and simulating a stratified flow in straight pipe. but facing so many problem in CFX-Pre.
prob: a 44mm(id)X50 mm(od).X1000mm(L) horizontal pipe initially filled with 50 degree water and .001m/s water at250 degree start flowing in side the pipe operating pressure is 17MPa. ambient temperature in 37 degree. and heat transfer through pipe also taking place.
so for steady state laminar flow simulation, what should be the
1. reference temp. ?
2. relative pressure ?
3. reference temp. ?
4.buoyancy reference temperature and Density. ?
5.static pressure.?

plz help me..and repy as soon as possible..
and thanx in advance..

ghorrocks · January 8, 2013, 18:13

Please start a new thread for a new question.

May 7, 2008, 00:38	creat a new material -blood in CFX-pre HELP!	#1
yuan Guest Posts: n/a	anybody who can tell me how to creat a material such as blood as Fixed Composition Mixture ? looking forwards!

May 7, 2008, 08:32	Re: creat a new material -blood in CFX-pre HELP!	#2
Andrew Guest Posts: n/a	Right-click on "Materials" and add new. Use this to create all the necessary components of the mixture. Then create a new mixture in the same way, but this time choose "Fixed Composition Mixture". For the components, click the button next to the components list to bring up a list of all the materials. Hold Ctrl and click on all of the components to select. Fill out all the necessary options.

May 11, 2008, 01:57	Re: creat a new material -blood in CFX-pre HELP!	#3
yuan Guest Posts: n/a	Thanks sincerely ! i'll try

January 8, 2013, 15:14	please help	#5
cpkewat New Member prakash Join Date: Jan 2013 Location: mumbai Posts: 9 Rep Power: 13	I working with ANSYS CFX. and simulating a stratified flow in straight pipe. but facing so many problem in CFX-Pre. prob: a 44mm(id)X50 mm(od).X1000mm(L) horizontal pipe initially filled with 50 degree water and .001m/s water at250 degree start flowing in side the pipe operating pressure is 17MPa. ambient temperature in 37 degree. and heat transfer through pipe also taking place. so for steady state laminar flow simulation, what should be the 1. reference temp. ? 2. relative pressure ? 3. reference temp. ? 4.buoyancy reference temperature and Density. ? 5.static pressure.? plz help me..and repy as soon as possible.. and thanx in advance..

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
only 1 of many named selections not showing up in cfx pre	mihirbhagat	CFX	2	April 26, 2019 05:56
Defining a domain in CFX Pre	ashtonJ	CFX	1	June 13, 2011 03:34
Importing a project from ICEM to CFX pre	faisal_durr	CFX	2	February 9, 2011 11:20
different CFX Pre and Post mesh region	mactech001	CFX	9	April 11, 2010 22:08
Combatibility between ICEM and CFX pre	Vag	CFX	1	February 12, 2009 09:07

March 29, 2012, 15:42		#4
hesamking Member Hesam Moghaddam Join Date: Mar 2012 Posts: 49 Rep Power: 14	dear Sir, Could you be able to create blood in CFX? could you please explain what you did and what components you took? Regards, Hesam

January 8, 2013, 18:13		#6
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,872 Rep Power: 144	Please start a new thread for a new question.