Analytical Model

October 25, 2007, 04:23

Hi,

I need an analytical model for a cold flow in a simple geometry (e.g flow in a rectangular duct) (Transient case would be nice) The values at the grid points (e.g velocities) should be calculated analytically. Is there such an example in CFX?

Thanks, selim

October 25, 2007, 05:15

I think there's not a specific tutorial of your problem in CFX, but the case seems to be quite simple and you can try to build up the simulation yourself: it's a good example to start with (stationary to start, maybe?)

October 25, 2007, 04:23	Analytical Model	#1
selim Guest Posts: n/a	Hi, I need an analytical model for a cold flow in a simple geometry (e.g flow in a rectangular duct) (Transient case would be nice) The values at the grid points (e.g velocities) should be calculated analytically. Is there such an example in CFX? Thanks, selim

October 25, 2007, 05:15	Re: Analytical Model	#2
mic Guest Posts: n/a	I think there's not a specific tutorial of your problem in CFX, but the case seems to be quite simple and you can try to build up the simulation yourself: it's a good example to start with (stationary to start, maybe?)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
gamma-ReTheta turbulence model for predicting transitional flows	FelixL	OpenFOAM Programming & Development	123	August 30, 2022 12:50
multiphaseInterFoam for RAS turbulence model	chiven	OpenFOAM Bugs	8	December 6, 2017 03:08
Atomization and Breakup model	xck1986	OpenFOAM	4	May 31, 2014 05:43
Water subcooled boiling	Attesz	CFX	7	January 5, 2013 04:32
LES and combustion model	Margherita Cadorin	CFX	0	October 29, 2008 06:24