Extrude 3D curve

Vimal Chaudhari · January 16, 2023, 12:10

Hello Experts,
I have import coordinates files for 3D curve. This 3D curve is upper camber only of airfoil. I don't need the lower camber.
Please guide me for the extrude this upper camber 3D curve as a solid with thickness 1mm.
Eager to hear from you.

ghorrocks · January 16, 2023, 15:53

This is a solid modelling question, not a CFD/CFX question. You should ask it in a solid modelling forum, such as this: https://www.cfd-online.com/Forums/ansys-meshing/

And don't forget - you have not told us what solid modelling package you are using!

January 16, 2023, 12:10	Extrude 3D curve	#1
Vimal Chaudhari New Member Vimal Chaudhari Join Date: Apr 2022 Posts: 12 Rep Power: 4	Hello Experts, I have import coordinates files for 3D curve. This 3D curve is upper camber only of airfoil. I don't need the lower camber. Please guide me for the extrude this upper camber 3D curve as a solid with thickness 1mm. Eager to hear from you.

January 16, 2023, 15:53		#2
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,830 Rep Power: 144	This is a solid modelling question, not a CFD/CFX question. You should ask it in a solid modelling forum, such as this: https://www.cfd-online.com/Forums/ansys-meshing/ And don't forget - you have not told us what solid modelling package you are using! __________________ Note: I do not answer CFD questions by PM. CFD questions should be posted on the forum.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
gmshToFoam error	erkampasha	Main CFD Forum	1	March 22, 2021 13:52
OpenFOAM error	Vinay Kumar V	Main CFD Forum	0	February 20, 2020 09:17
[Gmsh] Extrude on gmsh	Pedro Felix	OpenFOAM Meshing & Mesh Conversion	0	October 30, 2019 12:33
[Gmsh] Cannot get the right mesh from gmsh	JinBiao	OpenFOAM Meshing & Mesh Conversion	2	August 31, 2010 04:51
CFX4.3 -build analysis form	Chie Min	CFX	5	July 12, 2001 23:19